Taking Fewer Than Three Measurements; Skipping The Countdown Time - Welch Allyn ProBP 2400 User Manual

Special Function (cont.)
Taking fewer than three measurements in
« » Mode
The measurement sequence can be stopped at any time
during the measurement sequence by pressing the Start/
Stop Button. The device enters 'Stand by' and remaining
measurements are cancelled. Data from the measured
blood pressure can be viewed by pushing the M Button.
Cancel remaining
measurements at
any time during
the measurement
sequence.
24
Skipping countdown time in « » Mode
The countdown before and between measurements in « »
Mode can be skipped by pressing the Start/Stop Button. When
the Start/Stop Button is pressed during countdown, the device
will immediately begin the next measurement.
Skip the countdown time and
begin the measurement.
F
The device can be set in 'Stand by' Mode by pressing the Start/
Stop Button after completion of measurements. The device will
automatically switch to 'Stand by' Mode if left unattended for 1
minute.
Stand by