Selecting Units Of Measure - Welch Allyn ProBP 2400 User Manual

Initial set up (cont.)

Selecting units of measure

1) Make sure the device is switched off.
2) Press and hold the M Button and then turn on the
power with the On/Off Switch.
3) Release the M Button when backlight illuminates.
4) Press the Start/Stop Button to select the preferred
pressure unit (mmHg or kPa).
5) Press M Button to confirm the selection.
14
Units
1
mmHg
2
mmHg
3
kPa
F
MAP is the abbreviation of Mean Arterial Pressure.
F
PAM or MAP is chosen depending on language preference.
MAP or
PAM
F
MAP
Factory default setting
PAM
MAP