Rechargeable Battery And Power Adapter - Welch Allyn ProBP 2400 User Manual

Rechargeable battery and power adapter

Rechargeable Battery
The ProBP 2400 features a built-in, rechargeable Ni-MH
battery pack that provides up to 600~700 measurement
cycles on a full charge. The battery can be recharged with
the power adapter provided. The empty battery indicator is
displayed when the battery is low.
Welch Allyn ProBP 2400 digital blood pressure device

charge the battery until the
recharge indicator turns to
green.

The orange recharge
indicator means that the
recharge is in progress.

A green recharge indicator
means that the recharge is
completed.
Using a power adapter
Only use the adapter supplied with ProBP 2400 to recharge
the device.
1) Plug the adapter cable into the power socket of the device.
2) Plug the adapter plug into the wall socket. The battery
will be recharged as long as the device is attached to an
AC power source. After the battery is fully recharged, the
charging will stop. No battery power will be used as long
as the adapter is plugged in. The battery has to remain in
the ProBP 2400 also when using the AC power.
3) If the battery starts losing capacity, contact your local
dealer for replacement battery. The battery is user
replaceable.
27
EN