SOLTEK SL-65MV Users Manual And Technical Reference page 61

Soft-Off by PWRBTN Instant-Off (default): Turn off the system poer at once
State after Power
Failure
• Press <Enter> on the Wake Up Events item, then there is a list of it appears
for you to choose further setting.
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
VGA
LPT & COM
HDD & FDD
PCI Master
Wake Up On LAN/Ring
RTC Alarm Resume
Date (of Month)
Resume Time (hh:mm:ss)
Primary INTR
IRQs Activity Monitoring
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
LPT & COM When On of LPT & COM, any activity from one of the
after pushing the power button.
Delay 4 Sec: Turn off the system power 4 seconds
after pushing the power button. (to meet PC97/98
spec)
This field lets you determine the state that your PC
returns to after a power failure.If set to off, the PC will
not boot after a power failure. If set to On, the PC will
restart after a power failure.
Wake Up Events
OFF
LPT/COM
ON
OFF
Disabled
Disabled
0
0 0 0
ON
Press Enter
VGA When Enabled, you can set the VGA awakens the
system
listed system peripheral devices or IRQs wakes up
the system.
65MV/65MV-X
Item Help
Menu Level
61