SOLTEK SL-65MV Users Manual And Technical Reference page 50

65MV/65MV-X
Bank 0/1 2/3 4/5 DRAM
SDRAM Cycle Length
DRAM Clock This item allows you to control the DRAM speed.
DRAM Drive Strength Leave this item with Auto mode.
DRAM Drive Value When "DRAM Drive Strength" is set to "Auto", this
Memory Hole In order to improve performance, certain space in
P2C/C2P Concurrency This item allows you to enable/disable the PCI to CPU,
Fast R-W Turn Around This item controls the DRAM timing. It allows you to
50
This item allows you to select the value in this field,
Timing depending on whether the board has paged DRAMs
or EDO (Extended Data Output) DRAMs.
The choice: SDRM 8 / 10ns
You can select CAS latency time in HCLKs of 2/2 or
TIme 3/3. The system board designer should have set the
values in this field, depending on the DRAM installed.
Do not change the values in this field unless you
change specifications of the installed DRAM or the
installed CPU.
The choice: Host Clock, HCLK+33M, HCLK-33M.
The choice: Auto, Manual.
item will be unable to be selected. We don't recom-
mend user to adjust this item.
memory is reserved for ISA cards. This memory must
be mapped into the memory space below 16MB.
The choice: 15M-16M, Disabled.
CPU to PCI concurrency.
The choice: Enabled, Disabled.
enable / disable the fast read / write turn around.
The choice: Enabled, Disabled.
Normal
Medium
Fast
Turbo