Table of Contents
Advertisement
WOL1 : WAKE ON LAN (WOL) FUNCTION
Connect the Wake On LAN signal from LAN card
to WOL1
This connector connects to a LAN card with a Wake On LAN output. The connector
powers up the system when a wake-up packet or signal is received through the
LAN card.
This feature requires that Wake On LAN feature is enabled at the BIOS "Power
Management Setup" and that your system has an ATX power supply with at least
720mA / +5V
standby power.
65MV/65MV-X
WOL1
19
Advertisement
Table of Contents
