Removing/Installing Fan (Cooling Air) - Siemens WT46W430FF Manual

Repairs
6.22

Removing/installing fan (cooling air)

Graphic 25:Fan (cooling air)
2015-09-07 / DIS 113_58300000171499_ara_en_c
1 Catch element
Prerequisite:
• Air inlet panel has been removed.
6.22.1 Removing fan (cooling air)
1. Remove screws (2).
2. Press catch element (1) upwards.
3. Take fan (cooling air) out of the appliance.
4. Remove electrical connections from the right side of the fan (cooling air).
6.22.2 Installing fan (cooling air).
► Install fan (cooling air) in reverse sequence.
Copyright by BSH Hausgeräte GmbH
2 Screw
Catch element has been fitted ex works with two stabilising bars.
During removal, cut through the bars using a suitable tool.
Page 62 of 65