Changing The Programme Or Adding More Laundry; Cancelling The Programme; Programme End; Removing Laundry And Switching Off The Appliance - Siemens WT7U480ES Installation And Operating Instructions Manual

Operating the appliance
en
Changing the programme or
adding more laundry
You can remove or add laundry and
change or adjust the programme at any
time during drying.
Open the door or press I (Start/
1.
Pause) to pause the programme.
The drum will continue to
Note:
rotate when the CoolDown process
is in progress, even if you have
paused the programme. You can
stop the CoolDown process at any
time by opening the door.
Add or remove laundry.
2.
If required, select a different
3.
programme or a different
programme setting.~ "Overview of
programmes" on page 23
~ "Programme settings"
on page 25
Do not change the
Note:
programme during the CoolDown
process.
Close the door.
4.
Press I (Start/Pause).
5.
The programme duration is
Note:
updated on the display, depending on
the load and on the residual moisture in
the laundry. The values displayed may
change when the programme or load is
changed.

Cancelling the programme

The programme can be cancelled at
any time by opening the door or
pressing I (Start/Pause).
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, remove all
items of laundry from the dryer and
spread them out to allow the heat to
dissipate.
30

Programme end

"Ÿš will appear on the display.
Removing laundry and
switching off the appliance
Remove the laundry.
1.
Press # to switch off the appliance.
2.