Removing/Installing The Power Module - Siemens WT46W430FF Manual

Repairs
6.7

Removing/installing the power module

Prerequisite:
• Worktop has been removed.
6.7.1 Removing the power module
Graphic 16:Module is installed
1 Conductor connection
2 Cover
2015-09-07 / DIS 113_58300000171499_ara_en_c
3 Power module
Copyright by BSH Hausgeräte GmbH
Graphic 17:Position of power module
4 Catch elements
.
2. Remove conductor (1).
3. Pull cables out of the cable holders on the power module (3) and on the plastic
crossmember (2).
4. Disconnect electrical connections.
5. Disengage upper catch elements (4).
6. Push power module upwards and disengage lower catch elements.
7. Remove power module from the appliance.
Page 44 of 65