Repairs
6.20
Removing / installing drum bearing
Graphic 24:Drum bearings
2015-09-07 / DIS 113_58300000171499_ara_en_c
1
Drum shaft
2
Inner and outer raceway
3
Bearing block
Prerequisite:
•
Worktop has been removed.
•
Outer and inner process air cover has been removed.
6.20.1
Removing drum bearing
1. Remove screws (4) from the cover.
2. Remove bearing cover (6).
3. Remove retaining ring (5).
4. Remove outer raceway (2).
5. Remove screws (4) from the drum bearing (3).
6. Raise drum.
7. Take drum bearing out of the appliance.
6.20.2
Installing drum bearing
► Install drum bearing in reverse order.
Copyright by BSH Hausgeräte GmbH
4
Bolts
5
Retaining ring
6
Bearing cover
Page 60 of 65