Recall - Gigaset DX800+ User Manual

4. Setting RECALL (flash) time
- Press and hold the ENTER button for 4 sec.(On hook or Off
hook)
- The LCD will show : OPTION MENU ∆ ∇
- Using ∆(Up) or ∇(Down) button go to "SET FLASH TIME"
- Press ENTER to enter the menu
- The LCD will show
- Use ∆(Up) or ∇(Down) button to select the required flash
timing
- Then ENTER button to confirm and set the flash time.
Note:You have 4 options to choose from –100Ms, 300Ms, 600Ms,
1000Ms The UK standard being 100Ms
5. Setting LCD contrast
- Press and hold the ENTER button for 4 sec.(On hook or Off
hook)
- The LCD will show : OPTION MENU ∆ ∇
- Using ∆(Up) or ∇(Down) button go to "LCD CONTRAST"
- Press ENTER to enter the menu
- The LCD will show
- Use ∆(Up) or ∇(Down) button to select the required LCD
contrast level
- Then ENTER button to confirm and set the LCD
contrast level.
6. Setting Pulse/Tone dialing mode
The DX800+ is factory set for TONE Dialling. Should you need
PULSE dialling proceed as follows:
- Press and hold the ENTER button for 4 sec.(On hook or Off
hook)
- The LCD will show : OPTION MENU ∆ ∇
- Using ∆(Up) or ∇(Down) button go to "SET TONE/PULSE"
- Press ENTER to enter the menu
- The LCD will show
- Use ∆(Up) or ∇(Down) button to select the required dialing
mode.
- Then ENTER button to confirm and set the dialling mode.
: FLASH 300MS,
: CONTRAST 3,
: TONE,
8