Connecting The Telephone To The Pabx; Changing The Dialling Mode; Setting Recall; Setting An Automatic Prefix - Gigaset C810H Manual

Table of Contents

Advertisement

Gigaset C810H / CHN en/ A31008-M2357-Y101-1-7619 / Pabx_HS.fm / 15.09.2011

Connecting the telephone to the PABX

Connecting the
telephone to the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
The settings apply to the entire phone sys-
tem. They can be set on the base (see user
guide of your base) or on any registered
handset.

Changing the dialling mode

The following dialling modes can be
selected:
u
Tone dialling (DTMF)
¢ Ä ¢
u
Pulse dialling (DP)
§§Menu§§
¢
Dialing Mode
q

Setting recall

Recall specifies the flash time (break) used
for tone dialling when a recall (e.g. a consul-
tation call) is activated. Your phone is preset
at the factory for operation on the main con-
nection. For operation on a PABX, you may
have to change this value. Please refer to the
¢ Ä ¢
user guide for your PABX.
§§Menu§§
¢
Recall
q
32
Additional Features
Select dialling mode and press
§Ok§
(Ø = selected).
Additional Features
Select recall time and press
Ø
(
= set value).
Possible values are:
80 ms, 100 ms, 120 ms, 180 ms,
250 ms, 300 ms, 600 ms, 800 ms.

Setting an automatic prefix

You can set a prefix which is automatically
added to a phone number with at least 5
digits. This prefix can be used to dial into the
outside line when operating the device on a
PABX. A pause is added automatically after
the prefix.
The number must be dialled in idle mode, i.e.
then d.
~
first
Activating/deactivating the
automatic prefix
¢ Ä ¢
§§Menu§§
¢
Activation
q
Select On or Off and press
(Ø = selected).
Setting the prefix number
¢ Ä ¢
§§Menu§§
No.
~
Enter the prefix number and
press
Example: Auto Prefix = On and set to 65
You dial
1234
12345
#12345
Temporarily switching to
tone dialling (DTMF)
If your PABX still operates with dial pulsing
§Ok§
.
(DP), but you need tone dialling for a con-
nection (e.g. to listen to a network mail box)
you must switch to tone dialling for the call.
Precondition: You are conducting a call or
have already dialled an external number.
During the call:
*
Press the star key.
After the call is ended, dial pulsing is auto-
matically activated again.
Auto Prefix
§Ok§
¢
Auto Prefix
Prefix
§Ok§
.
Really dialled number
1234
65P12345
65P#12345

Advertisement

Table of Contents
loading

Table of Contents