Caller Id; To Review Calls - Gigaset DX800+ User Manual

- The display will show : XXXXXXX STORE NUMBER
- Select the desired memory location M1 to M7
To store a number during a conversation
- Press "Store" button
- The display will show : --------- STORE NUMBER
- Select the memory location M1 to M7
To make a call from the one-touch memory
In on-hook Mode
- Press M1 to M7
- Then press ENTER button to dial out
In off-hook
- Press M1 to M7 button to dial out the number

Caller ID

This phone is equipped with Caller ID display and will record caller's
phone numbers. Caller ID feature will function only if your telphone
line has this facility. For details, please consult your Technical team
or phone service provider.
If the number cannot be transmitted, the display will show the text
"–E—" (error in Caller ID signal).
You can keep upto 70 incoming call numbers in the Caller ID memory.
When the memory is full, the oldest record will be deleted and replaced
by the new one.
1. To review the incoming calls
- In on-hook or off-hook
- Press ∆ (up) / ∇ (down)
When there are new calls, the number of new calls will be displayed
in the "NEW XX". This icon will continue to show untill the new calls
have been reviewed.
END OF LIST
13