Calling Up Running Hours; Calling Up Motor Starts; Calling Up Module Hours - Chicago Pneumatic CPC 40 G Instruction Book

• Press Scroll button (12) to scroll downwards or upwards through the screens.

3.10 Calling up running hours

Starting from the Main screen:
• Press Scroll button (12) until <d.1> is shown and then press Enter button (13):
The screen shows the unit used (x1000 hrs) and the value (11.25): the running hours of the compressor are
11250 hours.

3.11 Calling up motor starts

Starting from the Main screen, press Scroll button (12) until <d. 2> is shown and then press Enter button
(13). A screen similar to the following appears:
This screen shows the number of motor starts (x 1 or - if <x1000> lights up - x 1000). In the above
example, the number of motor starts is 10100.

3.12 Calling up module hours

Starting from the Main screen, press Scroll button (12) until <d. 3> is shown and then press Enter button
(13). A screen similar to the following appears:
In the example shown, the screen shows the unit used (hrs) and the value (5000): the regulator module has
been in service during 5000 hours.
32
Instruction book
2920 7101 41