Scanpad 071 Protection Sleeve; Dbscar Diagnostic Connector (Using With Scanpad 071) - Launch ScanPad 071 User Manual

LAUNCH
9 Microphone

1.3.3 ScanPad 071 protection sleeve

It mainly includes: upper enclosure, soft sleeve and lower enclosure.
How to dismantle ScanPad 071 protection sleeve
To remove protection sleeve from ScanPad 071 main unit, follow the steps
described as below to proceed:
1. Pull the black sleeve outwards from the right margin of ScanPad 071, and
then remove it completely.
2. Reverse the upper enclosure and then use the screwdriver to loosen all
screws.
3. Take out the lower enclosure from the upper enclosure.
4. Finally remove ScanPad 071 tablet computer from the upper enclosure.
Note: Reverse the above-mentioned steps to install ScanPad 071 protection
sleeve. While mounting it, please pay more attention to the installation direction.

1.3.4 DBScar diagnostic connector (using with ScanPad 071)

①
OBD-16
connector
ScanPad 071 User's Manual — Knowledge of ScanPad 071
Fig. 1-3 DBScar diagnostic connector
diagnostic
1
2
3
4
To connect on vehicle's OBD2
DLC.
4