Others; Email; Add An Email Account; Delete An Email Account - Launch ScanPad 071 User Manual

LAUNCH

4 Others

4.1 Email

The function allows you to send and receive email. You can add POP3 or IMAP
email account for some common web email service provider.

4.1.1 Add an email account

Note: Before sending or receiving email, you have to set up an email account. In
addition, this function required a stable network connection.
1. On the desktop, tap
2. Input email address and password, tap "Next" or "Manual setup".
Note: If "Manual setup" is selected, please consult your email service provider
for detailed parameter setting.
3. Tap the desired account type (here take POP as example) to enter the
incoming settings screen, tap "Next".
4. Configure some sending settings, and tap "Next" to enter frequency settings.
5. After setting, tap "Next" and the system will prompt account setup has been
finished.
6. Tap "Next" to enter email main menu.

4.1.2 Delete an email account

1. Enter main menu screen, and tap
2. Tap the desired account, and then tap
3. Tap the account to be deleted to enter, and then scroll the screen
until "Remove account" appears, tap it to delete.

4.1.3 Send a email

1. Enter main menu screen, and tap
2. Tap the desired email account.
3. Tap to enter new mail writing interface.
4. Input the receiver address in To field.
ScanPad 071 User's Manual — Others
to enter main menu screen, and then tap
to enter account screen.
to enter account screen.
36
to choose "Settings".
.