Table of Contents
Advertisement
ETHERNET INTERFACE
IEC60870-5-104 protocol
S1 60870-5-104
GENERAL
CLIENT ADDRESS
POINT LIST
897794.cdr
IEC 60870-5-104
interoperability
1–50
S1 104 GENERAL
FUNCTION
▼
TCP PORT
SLAVE ADDRESS
CYCLIC DATA PERIOD
TCP CONN. TIMEOUT
S1 104 CLIENT ADDRESS
CLIENT ADDRESS 1
▼
CLIENT ADDRESS 2
...
CLIENT ADDRESS 5
S1 104 POINT LIST
BINARY INPUTS
ANALOG INPUTS
BINARY OUTPUTS
This document is adapted from the IEC 60870-5-104 standard. For this section the boxes
indicate the following: ⊠ – used in the standard direction; □– not used.
IEC 60870-5-104 Interoperability Document
1.
System or device:
□ System definition.
□ Controlling station definition (master).
⊠ Controlled station definition (slave).
2.
Application layer:
3.
Transmission mode for application data:
Mode 1 (least significant octet first), as defined in Clause 4.10 of IEC 60870-5-4, is used
exclusively in this companion standard.
4.
Common address of ADSU:
⊠ Two octets.
5.
Information object address:
⊠ Three octets.
⊠ Structured
⊠ Unstructured
6.
Cause of transmission:
CHAPTER 1: COMMUNICATIONS GUIDE
345 TRANSFORMER PROTECTION SYSTEM – COMMUNICATIONS GUIDE
104 BINARY INPUTS
POINT 0
▼
POINT 1
...
POINT 63
104 ANALOG INPUTS
POINT 0 ENTRY
▼
POINT 0 SCALE FCTR
POINT 0 DEADBAND
.
.
...
.
POINT 31 ENTRY
.
POINT 31 SCALE FCTR
POINT 31 DEADBAND
104 BINARY OUTPUTS
POINT 0 ON:
▼
POINT 0 OFF:
...
.
.
POINT 15 ON:
.
POINT 15 OFF:
.
Advertisement
Table of Contents
