Dnp Protocol Settings; Dnp Communication - GE 345 Communications Manual

CHAPTER 1: COMMUNICATIONS GUIDE

DNP protocol settings

DNP communication

S1 DNP
DNP GENERAL
DNP UNSOL RESPONSE*
DEFAULT VARIATION
DNP CLIENT ADDRESS*
DNP POINTS LIST
345 TRANSFORMER PROTECTION SYSTEM – COMMUNICATIONS GUIDE
The menu structure for the DNP protocol is shown below.
The following path is available using the keypad. For instructions on how to use the
keypad, please refer to Chapter 3 - Working with the Keypad.
PATH:
SETPOINTS > RELAY SETUP > COMMUNICATIONS > DNP PROTOCOL > DNP GENERAL
897769.cdr
S1 DNP GENERAL
DNP ADDRESS
▼
DNP TCP/UDP PORT
CHANNEL 1 PORT
CHANNEL 2 PORT
TME SYNC IIN PER.
DNP MSG FRAG SIZE
DNP TCP CONN. T/O
DNP UNSOL RESPONSE*
FUNCTION
▼
TIMEOUT
MAX RETRIES
DEST ADDRESS
DEFAULT VARIATION
DNP OBJECT 1
DNP OBJECT 2
DNP OBJECT 20
DNP OBJECT 21
DNP OBJECT 22
DNP OBJECT 23
DNP OBJECT 30
DNP OBJECT 32
DNP CLIENT ADDRESS*
CLIENT ADDRESS 1
CLIENT ADDRESS 2
CLIENT ADDRESS 3
CLIENT ADDRESS 4
CLIENT ADDRESS 5
S1 DNP POINTS LIST
BINARY INPUTS
BINARY OUTPUT
ANALOG INPUTS
RS485 INTERFACE
POINT 0
POINT 1
▼
POINT 2
...
POINT 63
POINT 0 ON
POINT 0 OFF
▼
POINT 1 ON
POINT 1 OFF
...
POINT 15 ON
POINT 15 OFF
POINT 0 ENTRY
▼
POINT 1 ENTRY
...
POINT 31 ENTRY
1–5