FLIR T1020 User Manual page 182

26 Technical data
Image presentation
Viewfinder
Automatic image adjustment
Automatic image adjustment, type
Manual image adjustment
Image presentation modes
Image modes
Infrared image
Visual image
Multi Spectral Dynamic Imaging (MSX)
Picture in Picture
Gallery
Measurement
Object temperature range
–40 to +150°C (–40 to +302°F)
0 to +650°C (+32 to +1202°F)
+300 to +2000°C (+572 to
+3632°F)
NOTE
For HSI use, above 30 Hz frame rate, the typical accuracy will be ±2.5°C (±4.5°F), or 2.5% of read-
ing @ 25°C (77°F).
Measurement analysis
Spotmeter
Area
Profile
Automatic hot/cold detection
Measurement presets
User presets
Difference temperature
Reference temperature
#T559954; r. AP/42311/42335; en-US
Built-in 800 × 480 pixels
Continuous, histogram based
Standard or histogram based on the image
content
Linear based, possible to adjust level/span/max./
min.
Thermal, thermal MSX, picture in picture, digital
camera
Full color infrared image
Full color visual image
Thermal image with enhanced detail presentation
Resizable and movable infrared area on the visual
image
• Review thumbnail/full image on the camera
• Edit measurements/palettes/image modes on
the camera
–40 to +5°C (–40 to +41°F)
+5 to +100°C (+41 to +212°F)
+100 to +150°C (+212 to +302°
F)
0 to +100°C (+32 to +212°F)
+100 to + 650°C (+212 to
+1202°F)
+300 to +2000°C (+572 to
+3632°F)
10
5 + 5 areas (boxes and circles) with max./min./
average
1 line profile with max./min. temperature
Auto hot or cold spotmeter markers within the
area and profile
No measurements, Center spot, Hot spot, Cold
spot, User preset 1, User preset 2
The user can select and combine measurements
from any number of spots/boxes/circles/profiles/
delta
Delta temperature between the measurement
functions and the reference temperature
Manually set using the difference temperature
Accuracy
±2°C (±3.6°F)
±1°C (±1.8°F)
±1%
±2°C (±3.6°F)
±2%
±2%
168