Press the OK key.
5 Depending on your selection, do one of the following:
o If you selected Always, enter the forwarding number.
o If you selected No Answer, then enter a forwarding number and then select Forward After
Rings, and enter how many rings should be played before forwarding the call (one ring is about
6 seconds). A value of 2 is recommended.
o If you selected Busy, enter a forwarding number for calls that come in when you're in another
call.
You can also enter a forwarding URL or IP address. For more information on using a URL or
IP address, see How to Make Calls.
6 Press the Enable soft key to confirm call forwarding.
7 Press Home to return to the Home screen.
To Disable Call-Forwarding:
1 From the Home screen, navigate to Settings > Feature Settings > Forward. If your handset is set up
with a single line, go to step X. If you have call forwarding set up for multiple lines, go to step 2.
2 If you have multiple lines, select Line. The Line Select screen displays.
3 Highlight the line you wish to set up with call forwarding, and press OK, as shown below.
4 If you've selected a line, or if your handset is set up with a single line, the Forwarding Type Select
screen displays, allowing you to select the forwarding type you want. Highlight the forwarding
type that's enabled and press the Disable soft key.
5 Press Home to return to the Home screen.
Enabling and Disabling Do Not Disturb (DND)
Do Not Disturb (DND) is an optional feature that your system administrator sets up. Your system may
not support it. For more information, contact your system administrator.
By default, the DND feature, when set up, applies to all lines on your handset (you can't apply DND to
just one line). The system administrator can enable your handset to apply DND on a line-by-line basis.
This section explains how to enable and disable the DND feature for all lines and for single lines. For
more information, contact your system administrator.
April, 2011 | 1725-36720-001_RevB
Using Telephony Applications
37
Need help?
Do you have a question about the spectralink 8450 and is the answer not in the manual?
Questions and answers