Indicators; Connecting The Hardware - TECOM GW5051 User Manual

2.3. Indicators

All LED indicators are on front panel which is shown below. Their functions are listed
in following table.
Label Color
POWER Light-Green
WLAN Light-Green
VoIP1 ~
Light-Green
VoIP2
LAN1 ~
Light-Green
LAN4
WAN Light-Green

2.4. Connecting the Hardware

You have to follow the steps to connect GW5051 to all the peripherals. The diagram,
shown below, depicts the generic connections of all equipments. It might be different
from the picture below which depends on your applications.
Power off all the devices before connecting them. They
include the computer(s), LAN hub / switch (if applicable), and the
GW5051.
WARNING
Step 1. Connect the indoor unit
Picture / diagram are to be inserted here.
Function
Steadily off: Power is off.
Solid on: Power on
Steadily off: Wi-Fi is disabled.
Blinking: Traffic is passing thru.
Steadily on: Wi-Fi is activated.
Steadily off: Regular phone is on hook.
Solid on: Regular phone is off hook.
Steadily off: Wired interface not established (Ethernet cable not
detected or not connected properly).
Blinking: Traffic is passing thru.
Steadily on: Wired interface established (Ethernet cable detected).
Steadily off: Wired interface not established (Ethernet cable not
detected or not connected properly).
Blinking: Traffic is passing thru.
Steadily on: Wired interface established (Ethernet cable detected).
Picture / diagram are to be inserted here.
DIRECT ACCESS to GW5051
Page 3