DIRECT ACCESS to GW5051
3.11.3. MAC Filter
Click the third category "MAC Filter" to enter into the related configuration of the
MAC address.
Figure 3-5-3. Wireless – MAC Filter
In this page, it allows you to Add / Remove hosts with the specified MAC addresses
that are able or unable to access the wireless network. When you select to Allow the
access of wireless network, only the PC with specified MAC addresses in the user
defined list can access the wireless network. When you select Deny the access of
wireless network, the PC with specified MAC addresses are unable to access to
wireless network.
Note: The MAC addresses in the list would immediately take effect when Allow or
Deny is checked.
3.11.4. Wireless Bridge
Click the fourth category "Wireless Bridge to enter into the configuration of the bridge.
Page 29