Management Service Mode - TECOM GW5051 User Manual

For the VoIP service mode, the wan connect type is only available for PPPoE and
IPoE.
For advanced user, you can customize the supported VLAN ID, DSCP for SIP,
DSCP for RTP, the advanced PPPoE settings or the advanced IPoE settings.
And then click the "Next" button.
Click the "Apply/Save" button to create the VoIP service interface.
3.4.3.

Management Service Mode

Figure 3-4-2. WAN – VoIP service Interface -2
Figure 3-4-2. WAN – VoIP service Interface -3
DIRECT ACCESS to GW5051
Page 16