Routing - TECOM GW5051 User Manual

DIRECT ACCESS to GW5051
Figure 3-6-3 shows how to add a new URL filter, about the "Port Number" parameter, you
may enter nothing, GW5051 will apply the destination port with a default value (80, is the
default http protocol port).

3.7. Routing

Routing application allows advanced users to configure route for GW5051 system. It allows
users to control followings,
1) Select a wan interface as the default gateway.
2) Configure a static route
3) Configure policy route
4) RIP Configuration
Default gateway is configured when wan connection is successfully built. Figure 3-8-1 shows
the view page, if you need a select another wan interface as a default way, select
corresponding one then click "Apply/Save" button.
Figure 3-8-1 Routing-Default Gateway
To configure static route, you only click "Static Route" on left side of web page, you
will see Figure 3-8-2,
Figure 3-8-2 Add/Remove static route
Page 21