Dns - TECOM GW5051 User Manual

DIRECT ACCESS to GW5051
Figure 3-8-5 RIP Configuration page

3.8. DNS

DNS support two type of settings, one is DNS server, the other is Dynamic DNS setting.
Figure 3-9-1 shows the DNS server configuration page,
Figure 3-9-1 DNS server Configuration
The DNS server information can be obtained from the wan interface list, or configured by
users. You can configure the dynamic DNS priority is high or static DNS is high.
When select the dynamic DNS priority is high, DNS server information will be obtained from
the wan interface list. Selected DNS Interfaces list can have multiple WAN interfaces served
as system DNS server but only one will be used according to the priority with the first being
the highest and the last one the lowest priority if the WAN interface is connected.
If you are sure about local DNS server address, you can configure it self and select the
priority of the static DNS is high.
However at most cases, DNS information should be configured via wan interface. Click
"Apply/Save" to make your change work.
Figure 3-9-2 shows how the dynamic DNS setting page,
Page 24