Introduction - TECOM GW5051 User Manual

1. Introduction

GW5051 wireless VoIP gateway provides you the cost-effective and integrated voice
and high-speed data access. Together with IEEE 802.11b/g, GW5051 provides
wireless mobility. Power Sourcing Equipment (PSE) over WAN interface provides
indoor For small enterprise and home
office, you are able to experience the quality voice over IP service and data
connection with most convenient wireless broadband access solution.
The Users Manual shows you the installation and the configurations of the GW5051
Features
PSE over WAN interface
10/100Base-T Ethernet router to provide Internet connectivity to all computers
on your LAN
VoIP which supports SIP protocol (RFC3261)
Support IEEE 802.11b/g WLAN
Network configuration through DHCP
PPPoA / PPPoE
NAT / NAPT
Web-based configuration browser such as Microsoft IE, Netscape Navigator,
Mozilla Firefox, etc.
System Requirements
Along with GW5051, you also need the following equipments or services before
installation.
Indoor unit which provides broadband connection and
GW5051.
Computers which equips at least an Ethernet 10Base-T/100Base-T network
interface card (port) or 802.11b/g/n WLAN card / adapter.
A web browser, such as Microsoft Internet Explorer (V5.0 or later version) or
Netscape Navigator (V4.7 or later version), which is used to configure the
GW5051.
DIRECT ACCESS to GW5051
Page 1