Using Your Dashboard Camera - Motorola MDC100 User Manual

3. Using your dashboard camera

• The purpose of your dashboard camera is to
continuously record the road ahead and to
automatically record and save any incidents or
accidents you might be involved in. The status
LED (Blue) will flash when it is recording.
• Your device records video by clusters of up to 3
minutes, the duration can be changed in the video
settings, see 4.2 Video Settings. It is equipped
with a sensor that detects shocks. Each time a
shock is detected, it will save to the SD card the
cluster during which the event occurred. The
sensitivity of the sensor can be changed in the
video settings screen, see section 4.
• Once the memory of your SD card is full, it will
automatically overwrite the oldest footages in
which no event has been detected. Your
dashboard camera will save a maximum of 20
sensor triggered footages. When it reaches 20, it
will start deleting old recorded footages on a first
in first out basis. The actual number of files that can
be recorded depends on the SD card capacity.
Using your dashboard camera 8