Getting Started; Connecting The Power Supply For The Camera; Fixing Magnetic Mount On The Wall - Motorola PIP1010 Connect User Manual

Getting Started

2.

Connecting the Power Supply for the Camera

2.1
Fixing mount to the wall
2.2
Screw
• Mark the position of the screw holes on the wall.
• Install wall anchors (if suitable for the wall type) and the wall
mounting screws.
• Remove the desk stand by loosening the screw on the underside of
the desk stand.
• Fix the camera on the wall mount bracket by fastening the screw.
8
• Insert the DC plug of the power
adapter into the DC socket on the
back of the Camera.
• Connect the other end of the
power adapter to a suitable
electrical outlet.
• The Camera turns on and the
power indicator lights up blue.
Note
Only use the supplied power
adapter (DC5V/1000mA).
Screw
Getting Started