Thank you for purchasing the Dashboard Camera. Please keep your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status.
Overview of your Dashboard Camera 1. Video/Photo/Replay 11. Reset button mode switcher 12. Mount socket 2. OK/Enter button 13. USB/Power socket 3. Menu/Back button 14. Memory card slot 4. Speaker 15. Short press when OFF: 5. Up arrow + Power ON 6.
1. Safety Instructions WARNING • Do not install the device within the driver’s or passenger airbag operation range. Please refer to your car’s service manual for details about the operation range of your car’s airbags. • Never modify modes, settings or program your device while your car is in motion.
2. Getting Started Installing your device Best Installation Location The above illustration refers to a left-hand drive car. For right-hand drive cars, please flip the position of the cable installation accordingly. • Install your device within the rear-view mirror area and within the wiper cleaning area to get the clearest possible view.
• You can also power it ON or OFF manually by pressing the power button. The power LED (Red) will turn ON when the power is ON. Whenever the device is turned ON or OFF, you will see a splash screen showing the Motorola logo. Getting Started...
3. Using your dashboard camera • The purpose of your dashboard camera is to continuously record the road ahead and to automatically record and save any incidents or accidents you might be involved in. The status LED (Blue) will flash when it is recording. •...
Switching modes Your dash camera has 3 main modes for recording and viewing: Video recording Main function and default mode for video recording. Photo shooting Allows you to capture and save still photographs to your SD card. Replay Allows you to view or delete saved footages or photographs.
Video recording mode Video recording will start automatically when the device is powered on. You can manually turn video recording off by pressing the OK button. Press the OK button once again to restart video recording. The status LED (Blue) will flash when the device is recording.