8
AC (120/220V) 16A Power Supply
Publication 1771 IN056B EN-P - December 2001
5. Attach the other end of the power cable to the D-shell connector
on the bottom of the power supply and tighten the connector
screws.
If you connect or disconnect the power supply
WARNING
cable with power applied an electrical arc can
occur. This could cause an explosion in hazardous
!
location installations. Be sure power is removed
or the area is nonhazardous before proceeding.
1771 P7
D shell connector
connector screws
Tighten connector screws
until snug, plus 1/4 turn).
left side I/O chassis
1771 CP1 cable
13449