Table of Contents
Advertisement
10
AC (120/220V) 16A Power Supply
1771 A1B, A2B, A3B1, A4B I/O chassis
1771-CP3
connector screws
Publication 1771 IN056B EN-P - December 2001
If you connect or disconnect the power supply
WARNING
cable with power applied an electrical arc can
occur. This could cause an explosion in hazardous
!
location installations. Be sure power is removed
or the area is nonhazardous before proceeding.
3. Connect the other end of the power cable to the D-shell connector
on the I/O chassis and tighten the connector screws until snug,
plus 1/4 turn.
1771 A3B I/O chassis
connector screws
12623 I
1771-CP2
12624 I
Hide quick links:
Advertisement
Table of Contents
