Allen-Bradley 1771-p7 Installation Instructions Manual page 7

AC (120/220V) 16A Power Supply
3. Slide the power supply onto the left side of the chassis:
Place keyhole slot over
large screw on I/O chassis.
1771 P7
Make sure mounting brackets
are behind the small screws.
4. Tighten the small screws until snug, plus 1/4 turn (about 29
pound–inches), to secure the power supply to the I/O chassis.
1771 P7
small screws
Slide power supply down.
left side I/O chassis
left side I/O chassis
Publication 1771 IN056B EN-P - December 2001
7
13448
12629 I