Chevrolet CRUZE 2015 Owner's Handbook Manual page 99

166 Phone
98
3. After the call has been placed, phone to enter the PIN provided in
turn the MENU/SEL knob and Step 3, or to confirm the six-digit
choose Merge Calls. code matches. The system
recognizes the new connected
4. To add more callers to the
phone after the pairing process is
conference call, repeat Steps 1
complete.
−3. The number of callers that can
6. If the phone prompts to accept be added is limited by your
connection or allow phone book wireless service carrier.
download, select always accept
Ending a call
and allow. The phone book may
not be available if not accepted.
Using the Infotainment controls
Some phones will put connection
Turn and press the MENU/SEL knob
request or phonebook request in
and select Hang Up or press Hang
a pull down task bar at the top of
Up on the screen.
the screen. Drag down the task
bar and look for connection/
Using steering wheel controls
phonebook request and accept.
Press x/n.
7. Repeat to pair additional phones.
Muting a call
Listing all paired and connected
During a call, all sounds from inside
phones / devices
the vehicle can be muted so that the
1. Press the CONFIG button.
person on the other end of the call
2. Select Phone Settings.
cannot hear them.
3. Select Device List.
Using the Infotainment controls
Turn and press the MENU/SEL knob
Deleting a paired phone / device
and select Mute Call. Press again to
1. Press the CONFIG button.
cancel mute.
2. Select Phone Settings.
Transferring a call
3. Select Device List.
Audio can be transferred between the
4. Select the phone to delete and
Bluetooth system and the cell phone.
follow the screen prompts.
The cell phone must be paired and
Connecting to a different phone
connected with the Bluetooth system
To connect to a different phone, the
before a call can be transferred.
new phone must be in the vehicle and
available to be connected to the
To transfer audio from the Bluetooth
Bluetooth system before the process
system to a cell phone
is started.
During a call with the audio in the
vehicle, press the Transfer Call
1. Press the CONFIG button.
button on the screen or press and
2. Select Phone Settings.
hold the q/w button on the steering
3. Select Device List.
wheel.
4. Select the new phone to connect
To transfer audio to the Bluetooth
to and follow the screen prompts.
system from a cell phone
Pairing with voice recognition
Use the audio transfer feature on the
A Bluetooth-enabled cell phone must cell phone. See your cell phone
be paired and then connected to the
manufacturer's user guide for more
vehicle before it can be used. See the information. Press the Transfer Call
cell phone manufacturer's user guide button on the screen or press and
hold the q/w button on the steering for Bluetooth functions before pairing
the cell phone.
wheel.
Pairing a phone
1. Press q/w. The system responds
"Please say a command",
followed by a tone.
Phone
Dual tone multi-frequency
2. Say "Pair". The system responds
with "Please search for Bluetooth
(DTMF) tones
devices on your phone, select
The in-vehicle Bluetooth system can
your vehicle, confirm or enter the
send numbers during a call. This is
pin number provided on the
used when calling a menu-driven
screen.".
phone system.
3. Start the pairing process on the
Using the Infotainment controls
phone to be paired.
■ Turn and press the MENU/SEL
4. Locate and select the device
knob and select Enter Number.
named after the vehicle make and
■ Enter the phone number, or select model in the list on the cell phone.
Enter Number on the screen and Follow the instructions on the cell
select digits, then press OK. phone to enter the PIN or to
confirm the six-digit code
matches. The system responds
"Successfully paired.".
5. Repeat Steps 1−4 to pair
additional phones.
Listing all paired and connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with "is connected"
after that phone name.
169