Chevrolet CRUZE 2015 Owner's Handbook Manual page 58

The Infotainment system has built-in
features intended to help avoid
distraction by disabling some
functions when driving. These
functions may gray out when they are
unavailable. Many Infotainment
features are also available through
the instrument cluster and steering
wheel controls.
Before driving:
■ Become familiar with the operation,
faceplate buttons, and screen
buttons.
■ Set up the audio by presetting
favorite stations, setting the tone,
and adjusting the speakers.
■ Set up phone numbers in advance
so they can be called easily by
pressing a single button or by using
a single voice command if
equipped with Bluetooth phone
capability.
To play the Infotainment system with
the ignition off, the vehicle is
equipped with Retained Accessory
Power (RAP).
Cleaning high gloss surfaces
and vehicle information and
radio displays
For vehicles with high gloss surfaces
or vehicle displays, use a microfiber
cloth to wipe surfaces. Before wiping
the surface with the microfiber cloth,
use a soft bristle brush to remove dirt
that could scratch the surface. Then
use the microfiber cloth by gently
rubbing to clean. Never use window
cleaners or solvents. Periodically
hand wash the microfiber cloth
separately, using mild soap. Do not
use bleach or fabric softener. Rinse
thoroughly and air dry before next
use.
Caution
Do not attach a device with a
suction cup to the display. This
may cause damage and would not
be covered by the vehicle
warranty.
Introduction
Software updates
See your dealer for possible future
software updates.
Overview
The Infotainment system is controlled
by using the buttons, touch screen,
steering wheel controls, and voice
recognition. Voice recognition 3 158
105
57
88