Chevrolet CRUZE 2015 Owner's Handbook Manual page 96

166 Phone
Voice recognition phone to enter the PIN provided in
Step 3, or to confirm the six-digit
The voice recognition system uses
code matches. The system
commands to control the system and
recognizes the new connected
dial phone numbers.
phone after the pairing process is
When using voice recognition:
complete.
■ The system may not recognize
6. If the phone prompts to accept
voice commands if there is too
connection or allow phone book
much background noise.
download, select always accept
■ A tone sounds to indicate that the
and allow. The phone book may
system is ready for a voice
not be available if not accepted.
command. Wait for the tone and
Some phones will put connection
then speak.
request or phonebook request in
■ Speak clearly in a calm and natural a pull down task bar at the top of
voice. the screen. Drag down the task
bar and look for connection/
Voice recognition 3 158
phonebook request and accept.
Audio system
7. Repeat to pair additional phones.
Sound comes through the vehicle's
Listing all paired and connected
front audio system speakers and
phones / devices
overrides the audio system. Use the
1. Press the CONFIG button.
m knob during a call to change the
volume level. The adjusted volume
2. Select Phone Settings.
level remains in memory for later
3. Select Device List.
calls. The system maintains a
minimum volume level.
Deleting a paired phone / device
Voice recognition 3 158
1. Press the CONFIG button.
2. Select Phone Settings.
Bluetooth audio 3. Select Device List.
Bluetooth music 3 129
4. Select the phone to delete and
follow the screen prompts.
Pairing with Infotainment
controls
Connecting to a different phone
To connect to a different phone, the
A Bluetooth-enabled cell phone must
be paired and then connected to the new phone must be in the vehicle and
available to be connected to the
vehicle before it can be used. See
Bluetooth system before the process
your cell phone manufacturer's user
is started.
guide for Bluetooth functions before
pairing the cell phone.
1. Press the CONFIG button.
2. Select Phone Settings.
Pairing information
3. Select Device List.
■ A Bluetooth-enabled phone and an
audio playback device can be
4. Select the new phone to connect
paired to the system at the same
to and follow the screen prompts.
time.
Pairing with voice recognition
■ Up to five devices can be paired to
A Bluetooth-enabled cell phone must
the Bluetooth system.
be paired and then connected to the
■ The pairing process is disabled
vehicle before it can be used. See the
when the vehicle is moving.
cell phone manufacturer's user guide
■ Pairing only needs to be completed
for Bluetooth functions before pairing
once, unless the pairing information
the cell phone.
on the cell phone changes or the
cell phone is deleted from the
Pairing a phone
system.
1. Press q/w. The system responds
"Please say a command",
followed by a tone.
Phone
■ Only one paired cell phone can be 2. Say "Pair". The system responds
connected to the Bluetooth system with "Please search for Bluetooth
at a time. devices on your phone, select
your vehicle, confirm or enter the
■ If multiple paired cell phones are
pin number provided on the
within range of the system, the
screen.".
radio will connect to the first phone
3. Start the pairing process on the in the list or to the phone that was
previously connected.
phone to be paired.
4. Locate and select the device
Pairing a phone / device
named after the vehicle make and
1. Press the CONFIG button or y/@.
model in the list on the cell phone.
2. Select Phone Settings.
Follow the instructions on the cell
phone to enter the PIN or to
3. Select Pair Device (Phone). The
confirm the six-digit code
radio displays Please start
matches. The system responds
Bluetooth search on your phone.
"Successfully paired.".
Confirm or enter number: If the
device supports a four-digit
5. Repeat Steps 1−4 to pair
personal identification number
additional phones.
(PIN), it will display. The PIN is
Listing all paired and connected
used in Step 5.
Phones
4. Start the pairing process on the
The system can list all cell phones
cell phone to be paired to the
paired to it. If a paired cell phone is
vehicle. See the cell phone
also connected to the vehicle, the
manufacturer's user guide.
system responds with "is connected"
5. Locate and select the device
after that phone name.
named after the vehicle make and
model in the list on the cell phone.
Follow the instructions on the cell
165
95