Radio Reception - Chevrolet CRUZE 2015 Owner's Handbook Manual

120 Radio
70
Recalling a preset station
AM
To recall a preset station from a
1. Press the AM screen button on
favorites page, do one of the
the home page; select AM by
following:
pressing SOURCE or SRCE; or
say "Tune AM" or "AM" through
■ Press the Fav screen button at the
voice recognition (if equipped).
top bar to display the preset pop-
2. Press the Menu screen button to up. Press one of the preset screen
buttons to go to the selected preset
display the AM stations or
station.
categories.
■ In the AM or FM main page, press
3. Press to select an option. To
one of the preset screen buttons to
update the station list, press
go to the selected preset station.
Refresh.
Radio data system (RDS)
RDS features are available for use
only on FM stations that broadcast
RDS information. With RDS, the radio
can display messages from radio
stations.
This system relies on receiving
specific information from these
stations and only works when the
information is available.
When information is broadcast from
the current FM station, the station
name or call letters display on the
audio screen.

Radio reception

FM
1. Press the FM screen button on the
Frequency interference and static can
Home Page; select FM by
occur during normal radio reception if
pressing SOURCE or SRCE; or
items such as cell phone chargers,
say "Tune FM" or "FM" through
vehicle convenience accessories,
voice recognition (if equipped).
and external electronic devices are
2. Press the Menu screen button to
plugged into the accessory power
display the FM stations or
outlet. If there is interference or static,
categories.
unplug the item from the accessory
power outlet.
3. Press to select an option. To
update the station list, press
FM
Refresh.
FM signals only reach about 16 to 65
km (10 to 40 mi). Although the radio
Favourite lists
has a built-in electronic circuit that
automatically works to reduce
Storing radio station presets
interference, some static can occur,
Up to 36 preset stations can be
especially around tall buildings or
stored. AM or FM can be mixed.
hills, causing the sound to fade in and
out.
1. From the AM or FM main page,
press and hold any of the 1−6
buttons or one of the preset
screen buttons at the bottom of
the screen. After a few seconds, a
beep is heard and the new preset
information displays on that
screen button.
2. Repeat for each preset.
Radio
Mixed-band presets AM
The range for most AM stations is Each favorite page can store six
greater than for FM, especially at preset stations. The presets within a
night. The longer range can cause page can be different radio bands.
station frequencies to interfere with
To scroll through the pages, press
each other. Static can occur when
FAV or the Fav screen button on the
things like storms and power lines
top bar. The current page number
interfere with radio reception. When
displays above the preset buttons.
this happens, try reducing the treble
The stored stations for each favorite
on the radio.
page display on the preset buttons.
To change the number of favorite
Cell phone usage
pages displayed:
Cell phone usage, such as making or
1. Press Config on the home page.
receiving phone calls, charging, or
just having the phone on may cause
2. Press Radio Settings.
static interference with the radio.
3. Press Number of Favorite Pages.
Unplug the phone or turn it off if this
happens.
119