Chevrolet CRUZE 2015 Owner's Handbook Manual page 41

88 Phone
40
Configuration → Bluetooth Settings →
Bluetooth → Pair Device, and then
press the MENU-TUNE button.
■ Bluetooth devices can be
registered not only by using
CONFIG button, but also by using
Phone Menu → Bluetooth Settings
→ Bluetooth → Add Device.
■ If there already is a Bluetooth
device connected to the
Infotainment system, the Bluetooth
is busy message will appear.
■ Connection standby will be
displayed with a message and a
security code. (The initial value is
0000, and can be changed from
System Configuration → Bluetooth
Settings → Bluetooth → Change
Bluetooth Code item.)
The Infotainment system can be
found by searching the to-be-
connected Bluetooth device.
Enter the security code for the
Infotainment system through the
Bluetooth device.
If the registration of the device to be
connected to the Infotainment system
is successful, then the screen will
display the information of the
Bluetooth device.
■ The Infotainment system can
register up to five Bluetooth
devices.
■ In some Bluetooth devices, it is only
possible to use it when "Always
connect" item is set.
Connecting/deleting/separating the
Bluetooth devices
Caution
If there is a Bluetooth device
already connected, that device
needs to be disconnected first.
Firstly, set up the Bluetooth device to
be connected from the Bluetooth
Settings menu to enable other
devices to search for the Bluetooth
device.