Chevrolet CRUZE 2015 Owner's Handbook Manual page 89

162 158 Voice recognition Voice recognition
88
Voice recognition
home" or "Call John at work". If a
number is not recognized, the first
number in the list will be called.
Pair or connect: Instructs the system
Voice recognition ....................... 158
to begin pairing a device.
Digit dial: Instructs the system to dial
a phone number one digit at a time.
After saying the digits, say "Dial".
Redial or redial last number: Instructs
the system to dial the last phone
number called.
Select device or change phone:
Instructs the system to switch to a
different paired device. The device
must be selected from the screen or
using the MENU/SEL knob.
Delete device: Instructs the system to
delete a paired device.
Read text messages or read SMS
messages: Instructs the system to
begin reading text messages from
paired device.
Not all devices support text
messages. Applicable where
equipped.
Voice recognition
Voice pass-thru
Voice pass-thru allows access to the
voice recognition commands on the
Voice recognition allows for hands-
cell phone, i.e. Siri or voice command.
free operation of the Infotainment
See the cell phone manufacturer's
88
system features.
user guide to see if the cell phone
Voice recognition can be used when
supports this feature.
the radio is on or when Retained
To activate phone voice recognition
Accessory Power (RAP) is active.
system, press and hold q/w on the
The system maintains a minimum
steering wheel for approximately two
volume level.
sec.
Using voice recognition
Settings commands
1. Press q/w on the steering wheel.
Verbose (set) on (mode), verbose
The audio system mutes. A voice
(set) off (mode): Instructs the system
prompt states, "Please say a
to turn voice prompts on or off.
command." Wait until the tone is
Language (language): Instructs the
heard before speaking.
system to set the language.
If there is no tone, make sure that
List devices: Instructs the system to
the volume is turned up.
give a list of devices to use.
While voice recognition is active,
Other commands
the system displays a w symbol in
Goodbye: Instructs the system to end
the top right of the screen.
a phone call or voice recognition.
2. Clearly speak one of the
Cancel: Instructs the system to cancel
commands listed later in this
an action.
section.
Go back, back, previous: Instructs the
system to go back to a prior menu.
Main menu: Instructs the system to go Press q/w twice on the steering
to the main menu.
wheel to skip the voice prompt
messages.
Yes, Yep, Yup, Ya, Sure, Right,
Correct, OK, Positive, You Got it,
Canceling voice recognition
Probably, You Bet: These can be
used to say "Yes".
1. Press and release x/n on the
steering wheel control to cancel a
No, Nope, Na, No way, Wrong,
command, if the system response
Incorrect, Negative, Not really, No I
does not match the voice
said, No I Did Not, No I Do Not: These
command, or say "Goodbye" or
can be used to say "No".
"Cancel".
Next page, Page down: Instructs the
2. The system replies "Goodbye".
system to scroll forward one page in
a list.
Helpful hints for speaking
Previous page, Page up: Instructs the
commands
system to scroll back one page in a
■ When multiple commands are
list.
available, choose the command
Voice recognition help
that works best for you.
To enter the help playback session,
■ Words in parentheses are optional.
clearly speak one of the help
For example, for the command
commands.
"Tune FM (frequency)", saying
"Tune FM 87.7" or "Tune FM" are
Help: The system plays back more
both valid commands.
specific help commands such as
radio settings for the user to choose
■ When the command is recognized,
from.
the system will either perform the
function or ask to confirm the
choice.