Chevrolet CRUZE 2015 Owner's Handbook Manual page 90

Radio: Use this command to learn ■ When the system does not
about how to select a band (AM or recognize the command, the
FM), and how to change radio system says "Pardon".
stations by speaking frequency
■ If experiencing difficulty with the
numbers.
system recognizing a command,
My media: Use this command to learn confirm that the command is
how to play specific tracks, artists, correct. Try saying the command
albums, devices connected to the clearly or wait for a brief moment
USB port, or to change sources. after the tone.
Phone: Use this command to learn ■ Background noise such as a
about how to dial, pair a device, or climate control fan positioned on
delete a device. high, open windows, and very loud
outside noises, even if the windows
Settings: Use this command to learn
are closed, can cause voice
about how to turn voice prompts on or
commands to be misunderstood.
off, or set the language.
■ The system is able to recognize
commands in different languages.
The system only recognizes
commands based on the language
selected.
■ To increase or decrease the voice
volume during a voice recognition
session, turn the volume knob of
the radio, or press the volume
steering wheel control. If the
volume is adjusted during a voice
recognition session, a volume bar
appears on the screen showing the
voice volume level as it is being
adjusted. This also changes the
volume of the guidance prompts.
■ When using navigation commands,
take the time to become familiar
with the address. Long delays
when giving the address can result
in the system not recognizing the
address or routing to a different
location than intended.
■ When providing the house number
portion of the address, the system
recognizes both digit format and
numerical text. An example would
be to say, "3-0-0-0-1" or "Thirty
Thousand One."
■ If the system provides destination
in another country on several
attempts, say the "Change country"
command and say the country of
interest. To enter a destination in a
different country, the country will
first have to be changed in the
system.
Voice recognition Voice recognition
Voice recognition commands
The following list shows the voice
commands available for the
infotainment system with a brief
description of each. The commands
are listed with the optional words in
parentheses. To use the voice
commands, see the previous
instructions.
Radio commands
Tune AM, tune FM, tune Stitcher:
Instructs the system to go to the
specific band and the last station.
Tune AM (frequency), tune FM
(frequency): Instructs the system to
go to the specific station.
Thumbs up: Instructs the system to
give the current song or station a
thumbs up in Stitcher.
Thumbs down: Instructs the system to
give the current song or station a
thumbs down in Stitcher.
My media commands
CD, AUX, USB, or Bluetooth audio:
Instructs the system to change the
source.
159 163
89