Text Messages - Chevrolet CRUZE 2015 Owner's Handbook Manual

170 Phone

Text messages

Voice recognition
The voice recognition system uses
For vehicles equipped with Bluetooth
commands to control the system and
capability, the system can display text
dial phone numbers.
messages, play back a message over
When using voice recognition:
the audio system, and send a
predefined message. Not all phones ■ The system may not recognize
support all functions and work with voice commands if there is too
Bluetooth. The radio only supports much background noise.
the receipt of SMS text messages. A
■ A tone sounds to indicate that the
request may need to be accepted on
system is ready for a voice
the phone or some phone settings
command. Wait for the tone and
may need to be changed to allow text
then speak.
messaging to function. See the cell
■ Speak clearly in a calm and natural
phone manufacturer's user guide.
voice.
The text message feature can also be
Voice recognition 3 158
initiated via voice vecognition.
Audio system
Using text messaging
Sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Use the
m knob during a call to change the
volume level. The adjusted volume
level remains in memory for later
calls. The system maintains a
minimum volume level.
Voice recognition 3 158
Bluetooth audio 1. Press the Messages button on the
home page or select text
Bluetooth music 3 129
messages from the phone main
Pairing with Infotainment
screen. Until all text messages
controls
are retrieved, the home page icon
will remain gray and the phone
A Bluetooth-enabled cell phone must
main screen option will be
be paired and then connected to the
removed.
vehicle before it can be used. See
your cell phone manufacturer's user
This feature will be disabled if the
guide for Bluetooth functions before
paired Bluetooth device does not
pairing the cell phone.
support SMS text messaging.
Pairing information
■ A Bluetooth-enabled phone and an
audio playback device can be
paired to the system at the same
time.
■ Up to five devices can be paired to
the Bluetooth system.
■ The pairing process is disabled
2. Once all messages are retrieved, when the vehicle is moving.
the text message inbox displays.
■ Pairing only needs to be completed
Select a message for viewing.
once, unless the pairing information
Viewing messages is only
on the cell phone changes or the
available while the vehicle is not in
cell phone is deleted from the
motion.
system.
Phone
■ Only one paired cell phone can be
connected to the Bluetooth system
at a time.
■ If multiple paired cell phones are
within range of the system, the
radio will connect to the first phone
in the list or to the phone that was
previously connected.
Pairing a phone / device 3. View the message or select
Listen to hear the message
1. Press the CONFIG button or y/@.
through voice prompt. The
2. Select Phone Settings.
message view screen is locked
3. Select Pair Device (Phone). The
out while the vehicle is in motion.
radio displays Please start
■ Select Call to dial the contact or
Bluetooth search on your phone.
number associated with the text.
Confirm or enter number: If the
Not all phones allow calling the
device supports a four-digit
sender of the message and will
personal identification number
result in not being able to select
(PIN), it will display. The PIN is
Call.
used in Step 5.
4. Start the pairing process on the
cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide.
5. Locate and select the device
named after the vehicle make and
model in the list on the cell phone.
Follow the instructions on the cell
165
99