Chevrolet CRUZE 2015 Owner's Handbook Manual page 94

164 Phone
Phone
Voice recognition
The voice recognition system uses
commands to control the system and
dial phone numbers.
Bluetooth® ................................. 164
Bluetooth® ................................... 93
When using voice recognition:
Operation ................................... 167
Operation ..................................... 96
■ The system may not recognize
voice commands if there is too
Text messages .......................... 170
Text messages ............................. 99
much background noise.
Hands free phone ...................... 172
Hands free phone ....................... 101
■ A tone sounds to indicate that the
system is ready for a voice
command. Wait for the tone and
then speak.
■ Speak clearly in a calm and natural
voice.
Voice recognition 3 158
Audio system
Sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Use the
m knob during a call to change the
volume level. The adjusted volume
level remains in memory for later
calls. The system maintains a
minimum volume level.
Voice recognition 3 158
Bluetooth®
Bluetooth audio
Bluetooth music 3 129
Overview
Pairing with Infotainment
If equipped with Bluetooth capability,
controls
the system can interact with many cell
A Bluetooth-enabled cell phone must
phones and devices, allowing:
be paired and then connected to the
■ Placing and receiving hands-free
vehicle before it can be used. See
calls.
your cell phone manufacturer's user
■ Sharing of the cell phone's address
guide for Bluetooth functions before
book or contact list with the vehicle.
pairing the cell phone.
The phone book will only display
when that phone is connected.
Pairing information
■ A Bluetooth-enabled phone and an
■ Placing outgoing calls by voice
audio playback device can be
recognition.
paired to the system at the same
The system can be used while in ON/
time.
RUN, ACC/ACCESSORY, or
■ Up to five devices can be paired to
Retained Accessory Power (RAP).
the Bluetooth system.
The range of the Bluetooth system
can be up to 9.1 m (30 ft).
■ The pairing process is disabled
when the vehicle is moving.
The radio can connect to most
Bluetooth-enabled phones. Available
■ Pairing only needs to be completed
features and functions may be
once, unless the pairing information
dependent on the device.
on the cell phone changes or the
cell phone is deleted from the
system.
Phone
■ Only one paired cell phone can be On a current phone call screen, an
image of the contact from your connected to the Bluetooth system
phone's contact list can be displayed. at a time.
Not all phones are compatible with
■ If multiple paired cell phones are
this feature.
within range of the system, the
radio will connect to the first phone
Bluetooth controls
in the list or to the phone that was
Use the buttons on the infotainment
previously connected.
system and the steering wheel to
operate the Bluetooth system.
Pairing a phone / device
1. Press the CONFIG button or y/@.
Steering wheel controls
2. Select Phone Settings.
q/w (push to talk): Press to answer
3. Select Pair Device (Phone). The
incoming calls and start voice
radio displays Please start
recognition.
Bluetooth search on your phone.
x/n (mute / end call): Press to end
Confirm or enter number: If the
a call, decline an incoming call, or
device supports a four-digit
cancel voice recognition.
personal identification number
+ X − (volume): Press + or − to
(PIN), it will display. The PIN is
increase or decrease the volume.
used in Step 5.
4. Start the pairing process on the
Infotainment system controls
cell phone to be paired to the
For information about how to navigate
vehicle. See the cell phone
the menu system using the
manufacturer's user guide.
infotainment controls, see control
elements overview 3 106. 5. Locate and select the device
58
named after the vehicle make and
y/@ (phone / mute): Press to enter
model in the list on the cell phone.
the Phone main menu.
Follow the instructions on the cell
165
93