Chevrolet CRUZE 2015 Owner's Handbook Manual page 101

166 Phone
100
phone to enter the PIN provided in
Step 3, or to confirm the six-digit
code matches. The system
recognizes the new connected
phone after the pairing process is
complete.
6. If the phone prompts to accept
connection or allow phone book
download, select always accept
and allow. The phone book may
not be available if not accepted.
Some phones will put connection
request or phonebook request in
■ Select Reply to reply to a text
message that was received as an a pull down task bar at the top of
incoming message. Not all phones the screen. Drag down the task
bar and look for connection/
allow message sending.
phonebook request and accept.
■ Select the desired message from
7. Repeat to pair additional phones. the display of predefined messages
to send as the reply message.
Listing all paired and connected
phones / devices
1. Press the CONFIG button.
2. Select Phone Settings.
3. Select Device List.
Deleting a paired phone / device
1. Press the CONFIG button.
2. Select Phone Settings.
3. Select Device List.
4. Select the phone to delete and
follow the screen prompts.
Connecting to a different phone
To connect to a different phone, the
new phone must be in the vehicle and
available to be connected to the
Bluetooth system before the process
is started.
1. Press the CONFIG button.
2. Select Phone Settings.
■ Select Send to send that message.
3. Select Device List.
■ Select Back to cancel and return to
4. Select the new phone to connect
the previous screen.
to and follow the screen prompts.
Pairing with voice recognition
A Bluetooth-enabled cell phone must
be paired and then connected to the
vehicle before it can be used. See the
cell phone manufacturer's user guide
for Bluetooth functions before pairing
the cell phone.
Pairing a phone
1. Press q/w. The system responds
"Please say a command",
followed by a tone.
Phone
Incoming text messages
2. Say "Pair". The system responds
with "Please search for Bluetooth
devices on your phone, select
your vehicle, confirm or enter the
pin number provided on the
screen.".
3. Start the pairing process on the
phone to be paired.
4. Locate and select the device
named after the vehicle make and
model in the list on the cell phone.
Follow the instructions on the cell
phone to enter the PIN or to
confirm the six-digit code
A pop-up screen is displayed when
matches. The system responds
there is an incoming text. The pop-up
"Successfully paired.".
will remain on the screen until
5. Repeat Steps 1−4 to pair
Dismiss is selected.
additional phones.
■ Select Listen to hear the message
through voice recognition.
Listing all paired and connected
Phones
■ Select View to view the message.
The system can list all cell phones
Viewing is not available while the
paired to it. If a paired cell phone is
vehicle is in motion.
also connected to the vehicle, the
■ Select Reply to reply to the
system responds with "is connected"
message using a predefined
after that phone name.
message.
171