Chevrolet CRUZE 2015 Owner's Handbook Manual page 102

172 Phone
Voice recognition ■ Select Call to dial the contact or
number associated with the text.
The voice recognition system uses
commands to control the system and
■ Select Dismiss to close out the
dial phone numbers.
incoming pop-up message screen.
When using voice recognition:
Text messaging settings
■ The system may not recognize
voice commands if there is too
much background noise.
■ A tone sounds to indicate that the
system is ready for a voice
command. Wait for the tone and
then speak.
■ Speak clearly in a calm and natural
voice.
Voice recognition 3 158
Audio system
Sound comes through the vehicle's
Text Message Settings are available
front audio system speakers and
from the text message inbox.
overrides the audio system. Use the
m knob during a call to change the
volume level. The adjusted volume
level remains in memory for later
calls. The system maintains a
minimum volume level.
Voice recognition 3 158
Bluetooth audio
Bluetooth music 3 129
Pairing with Infotainment
controls
A Bluetooth-enabled cell phone must
be paired and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone.
Pairing information
■ Select Manage Predefined
■ A Bluetooth-enabled phone and an
Messages to create a user defined
audio playback device can be
message that can be used later to
paired to the system at the same
reply to a text message.
time.
■ Select Text Alerts to choose the
■ Up to five devices can be paired to
alert behavior for incoming text
the Bluetooth system.
messages:
■ The pairing process is disabled
◆ Text alert with tone
when the vehicle is moving.
◆ Tone only
■ Pairing only needs to be completed
◆ Off
once, unless the pairing information
on the cell phone changes or the
cell phone is deleted from the
system.
Phone
Hands free phone
■ Only one paired cell phone can be
connected to the Bluetooth system
at a time.
Using Bluetooth voice
recognition
■ If multiple paired cell phones are
within range of the system, the
To use voice recognition, press the
radio will connect to the first phone
q/w button on the steering wheel.
in the list or to the phone that was
Use the commands below for the
previously connected.
various voice features. For additional
information, say "Help" while in a
Pairing a phone / device
voice recognition menu.
1. Press the CONFIG button or y/@.
Making a call
2. Select Phone Settings.
Calls can be made using the following
3. Select Pair Device (Phone). The
commands.
radio displays Please start
Dial or call: These commands can be
Bluetooth search on your phone.
used interchangeably to dial a phone
Confirm or enter number: If the
number.
device supports a four-digit
personal identification number
Digit dial: This command allows a
(PIN), it will display. The PIN is
phone number to be dialed by
used in Step 5.
entering the digits one at a time.
4. Start the pairing process on the
Redial: This command dials the last
cell phone to be paired to the
number used on the cell phone.
vehicle. See the cell phone
Using the dial or call command
manufacturer's user guide.
5. Locate and select the device
named after the vehicle make and
model in the list on the cell phone.
Follow the instructions on the cell
165
101