Dodge grand caravan 2011 Owner's Manual page 88

JOBNAME: cims CHRY OM French PAGE: 88 SESS: 4 OUTPUT: Tue Nov 2 10:27:14 2010 SUM: 34A906B9
/chry_pdm/chrysler/owners/car/og
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Illuminated Vanity Mirrors — If
Equipped
An illuminated vanity mirror is located on
the sun visor. To use the mirror, rotate the
sun visor down and swing the mirror cover
upward. The lights turn on automatically.
Closing the mirror cover turns off the
lights.
art=030405283.tif
88
BLIND SPOT MONITORING —
IF EQUIPPED
The Blind Spot Monitoring (BSM) system
uses two radar-based sensors, located
inside the rear bumper fascia, to detect
highway licensable vehicles (automobiles,
trucks, motorcycles, etc.) that enter the
blind spot zones from the rear/front/side of
NO TRANS
the vehicle.
art=030405533.tif
Illuminated Mirror
NO TRANS
Rear Detection Zones
When the vehicle is started, the BSM
warning light will momentarily illuminate in
both outside rear view mirrors to let the
driver know that the system is operational.
The BSM system sensors operate when
the vehicle is in any forward gear or RE-
VERSE and enters stand-by mode when
the vehicle is in PARK.
The BSM detection zone covers approxi-
mately one lane on both sides of the
vehicle (11 ft or 3.35 m). The zone starts at
the outside rear view mirror and extends
approximately 20 ft (6 m) to the rear of the
vehicle. The BSM system monitors the
detection zones on both sides of the ve-
hicle when the vehicle speed reaches
approximately 6 mph (10 km/h) or higher
and will alert the driver of vehicles in these
areas.