Customer-Programmable Features; Setup - Dodge grand caravan 2011 Owner's Manual

JOBNAME: cims CHRY OM French PAGE: 201 SESS: 4 OUTPUT: Tue Nov 2 10:27:14 2010 SUM: 25BF67DA
/chry_pdm/chrysler/owners/car/og
map. Once properly set, the compass will
automatically compensate for the differ-
ences, and provide the most accurate
compass heading. For the most accurate
compass performance, the compass must
be set using the following steps.
NOTE: Keep magnetic materials away
from the top of the instrument panel, such
as iPod's, Mobile Phones, Laptops and
Radar Detectors. This is where the com-
pass module is located, and it can cause
interference with the compass sensor, and
it may give false readings.
art=040506040.tif NO TRANS
Compass Variance Map
1. Turn the ignition switch ON.
2. Press the UP or DOWN button until the

Setup

(Customer-Programmable
tures) menu is reached, then press the
SELECT button.
3. Press the DOWN button until the "Com-
pass Variance" message is displayed in
UNDERSTANDING YOUR INSTRUMENT PANEL
the EVIC, then press the SELECT button.
The last variance zone number displays in
the EVIC.
4. Press and release the SELECT button
until the proper variance zone is selected,
according to the map.
5. Press and release the RETURN button
to exit.

Customer-Programmable Features

(System Setup)
Personal Settings allows you to set and
recall features when the transmission is in
Fea-
PARK. If the transmission is out of PARK or
the vehicle begins moving, a warning
message PERSONAL SETTING NOT
AVAILABLE, followed in three seconds
by, VEHICLE NOT IN PARK.
201