Dodge grand caravan 2011 Owner's Manual page 280

JOBNAME: cims CHRY OM French PAGE: 280 SESS: 4 OUTPUT: Tue Nov 2 10:27:14 2010 SUM: 224D21E9
/chry_pdm/chrysler/owners/car/og
STARTING AND OPERATING
B-Pillar
Cold Tire Pressure
Maximum Inflation Pressure
Recommended Inflation Pressure
Tire Placard
280
Term
The vehicle B-Pillar is a structural member of the body located between
the front and rear door (of a four-door vehicle) running from the sill to the
roof.
Cold tire inflation pressure is defined as the tire pressure after the vehicle
has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km)
after sitting for a three hour period. Inflation pressure is measured in units
of PSI (pounds per square inch) or KPa (kilopascals).
The maximum inflation pressure is the maximum permissible cold tire infla-
tion pressure for this tire. The max inflation pressure is molded into the
sidewall.
Vehicle manufacturer's recommended tire inflation pressure as shown on
the tire placard.
A paper label permanently attached to the vehicle showing the vehicle's
loading capacity, the original equipment tire size and the recommended
inflation pressure.
Definition