Page 2
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and features and equipment that are either standard or op- the name Chrysler Canada Inc.
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality - all your satisfaction.
INTRODUCTION 5 control. Failure to operate this vehicle safely may result existing seat belts could cut the highway death toll by in a collision, rollover of the vehicle, and severe or fatal 10,000 or more each year and could reduce disabling injury.
INTRODUCTION 7 WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death.
Page 11
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ To Disarm The System ....18 A Word About Your Keys ....12 ▫...
Page 12
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Battery Replacement ....23 Liftgate ......37 ▫...
Page 13
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Seat Belt Lock Out ....54 Engine Break-In Recommendations ..85 ▫...
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The keys for your new vehicle are enclosed in a plastic The keys for your vehicle are double-sided. You can bag with the key code number on it. If you received your insert the keys into the locks with either side up.
Page 15
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder the vehicle. The system will shut the engine off in two If you open the driver’s door and the key is in the seconds if someone uses an invalid key to try to start the ignition, a chime will sound to remind you to remove the engine.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 If the Vehicle Security Light turns on during normal Replacement Keys vehicle operation (vehicle running for longer than 10 sec- NOTE: Only keys that are programmed to the vehicle onds), it indicates that there is a fault in the electronics. electronics can be used to start and operate the vehicle.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE procedure. This procedure consists of programming a 3. Insert the second valid key into the ignition switch. blank key to the vehicle electronics. A blank key is one Turn the ignition switch to the ON/RUN position within that has never been programmed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Repeat this procedure to program up to eight keys. If you VEHICLE SECURITY ALARM — IF EQUIPPED do not have a programmed Sentry Key , contact your The Vehicle Security Alarm monitors the vehicle doors, authorized dealer for details.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Vehicle Security Light (located in the instrument previously described arming sequence has occurred, the cluster) will flash rapidly for about 16 seconds to signal Vehicle Security Alarm will arm regardless of whether that the Vehicle Security Alarm is arming.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 The lights also will fade to off if you turn on the ignition after you close all the doors. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer- Programmable Features)” in “Understanding Your In- strument Panel”...
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock The Doors And Liftgate On non-EVIC equipped vehicles, perform the following Press and release the UNLOCK button on the RKE steps: transmitter once to unlock the driver’s door or twice to 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 To Lock The Doors And Liftgate 1. Press the LOCK button on a programmed (i.e., func- Press and release the LOCK button on the RKE transmit- tional) RKE transmitter for at least four seconds, but not ter to lock all doors and the liftgate.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Flash Lights With Lock 3. Test the feature from outside the vehicle by pressing The feature will cause the parking lights to flash when the LOCK and UNLOCK buttons on the RKE transmitter. the doors are locked or unlocked with the RKE transmit- 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Using The Panic Alarm During the PANIC mode, the door locks and RKE systems will function normally. PANIC mode will not NOTE: The PANIC and SECURITY alarms are quite disarm the Vehicle Security Alarm system on vehicles so different.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. With the RKE transmitter buttons facing down, use a 3. Remove and replace the battery. Avoid touching the flat blade to pry the two halves of the RKE transmitter new battery with your fingers. Skin oils may cause case apart.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 NOTE: Changes or modifications not expressly ap- How To Use Remote Start proved by the party responsible for compliance could All of the following conditions must be met before the void the user’s authority to operate the equipment. engine will remote start: •...
Page 28
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start WARNING! Press and release the REMOTE START button • Do not start or run an engine in a closed garage or on the RKE transmitter twice, within five sec- onds.
Page 29
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Remote start will also cancel if any of the following occur: To Exit Remote Start Mode And Drive The Vehicle Before the end of the 15-minute cycle, press and release • The engine stalls or RPM exceeds 2500 the UNLOCK button on the RKE transmitter to unlock •...
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS WARNING! Manual Door Locks • For personal security and safety in the event of an Use the manual door lock knob to lock the doors from accident, lock the vehicle doors when you drive as inside the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 A chime will sound if the key is in the ignition switch and a door is open as a reminder to remove the key. Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Door Locks Programming 5. Repeat these steps if you want to return this feature to The automatic door locks feature can be enabled or its previous setting. disabled as follows: NOTE: Use the automatic door locks feature in accor- For vehicles equipped with an Electronic Vehicle Infor- dance with local laws.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Automatic Unlock Doors On Exit Programming 4. A single chime will indicate the completion of the The automatic unlock doors on exit feature can be programming. enabled or disabled as follows: 5. Repeat these steps if you want to return this feature to For vehicles equipped with an Electronic Vehicle Infor- its previous setting.
Page 34
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE opened by using the outside door handle even if the NOTE: • When the child lock system is engaged, the door can inside door lock is in the unlocked position. be opened only by using the outside door handle even though the inside door lock is in the unlocked posi- tion.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged. WINDOWS Power Windows The power window controls are located on the driver’s door trim panel.
Page 36
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Personal Settings (Customer-Programmable Features)” in To open the window part way, press the window switch “Understanding Your Instrument Panel” for further in- to the first detent and release it when you want the formation.
Page 37
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Auto Up Feature With Anti-Pinch Protection — If For vehicles equipped with the EVIC, the power window Equipped switches will remain active for up to 10 minutes after the On some models, the driver’s and front passenger’s (if ignition switch is turned to the LOCK position.
Page 38
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Window Lockout Button WARNING! The window lockout button on the driver’s door (below the power window switches) allows you to disable the There is no anti-pinch protection when the window window control on the other doors. To disable the is almost closed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Front seat belts incorporate pretensioners that may OCCUPANT RESTRAINTS Some of the most important safety features in your enhance occupant protection by managing occupant vehicle are the restraint systems: energy during an impact event •...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: The Advanced Front Airbags have a multistage Buckle up even though you are an excellent driver, even inflator design. This allows the airbag to have different on short trips. Someone on the road may be a poor driver rates of inflation based on the severity and type of and cause an accident that includes you.
Page 42
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Wearing a seat belt incorrectly is dangerous. Seat • It is dangerous to ride in a cargo area, inside or belts are designed to go around the large bones of outside of a vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is located on the B-Pillar along the outboard side and rear of the seat cushion. The rear seat belt latch plates are located on the C-Pillar for the outboard rear seating positions and next to your arm in the center rear seating position.
Page 44
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click.” • A belt that is buckled into the wrong buckle will not protect you properly.
Page 45
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 4. Position the lap belt across your thighs, below your WARNING! (Continued) abdomen. To remove slack in the lap portion, pull up a • A belt that is worn under your arm is dangerous. bit on the shoulder belt.
Page 46
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Position the shoulder belt on your chest so that it is 6. To release the belt, push the red button on the buckle. comfortable and not resting on your neck. The retractor The belt will automatically retract to its stowed position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Lap/Shoulder Belt Untwisting Procedure Seat Belt Pretensioner Use the following procedure to untwist a twisted lap/ The seat belts for both front seating positions are shoulder belt. equipped with a pretensioning device that is designed to remove any slack from the seat belt systems in the event 1.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage In the front seating positions, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Press the release button to release the anchorage, and then move it up or down to the position that fits you best.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Seat Belts In Passenger Seating Positions Only pull the belt webbing out far enough to comfortably The seat belts in the passenger seating positions are wrap around the occupants mid-section so as to not equipped with Automatic Locking Retractors (ALR) activate the ALR.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Engage The Automatic Locking Mode WARNING! 1. Buckle the combination lap and shoulder belt. • The belt and retractor assembly must be replaced 2. Grasp the shoulder portion and pull downward until if the seat belt assembly Automatic Locking Re- the entire belt is extracted.
Page 51
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 How the Active Head Restraints (AHR) Work The Occupant Restraint Controller (ORC) determines whether the severity, or type of rear impact will require the Active Head Restraints (AHR) to deploy. If a rear impact requires deployment, both the driver and front passenger seat AHRs will be deployed.
Page 52
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident.
Page 53
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 1 — Downward Movement 3 — Final Downward Movement To Engage Locking Mecha- nism 2 — Rearward Movement...
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. The AHR front soft foam and trim half should lock NOTE: • If you have difficulties or problems resetting the into the back decorative plastic half. Active Head Restraints, see an authorized dealer. •...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 speed over 5 mph (8 km/h). The reminder sequence lasts WARNING! for 96 seconds or until the respective seatbelts are fas- • The belt and retractor assembly must be replaced tened. After the sequence completes, the Seat Belt Re- minder Light remains illuminated until front belts are if the seat belt assembly “Automatic Locking Re- fastened.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE BeltAlert can be enabled or disabled by your authorized 4. Turn the ignition key to the OFF position. A single dealer or by following these steps: chime will sound to signify that you have successfully completed the programming.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Seat Belts and Pregnant Women WARNING! We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is Using a seat belt extender when not needed can the best way to keep the baby safe.
Page 58
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: These airbags are certified to the new Federal The Advanced Front Airbags have a multistage inflator regulations for Advanced Airbags. design. This allows the airbag to have different rates of inflation that are based on the severity and type of collision.
Page 59
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Airbag System Components Your vehicle may be equipped with the following airbag system components: • Occupant Restraint Controller (ORC) • Airbag Warning Light • Steering Wheel and Column • Instrument Panel • Knee Impact Bolster •...
Page 60
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Active Head Restraint for Driver and The first stage inflator is triggered immediately during an Front Passenger impact that requires airbag deployment. This low output is used in less severe collisions. A higher energy output is •...
Page 61
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 WARNING! WARNING! (Continued) • Do not drill, cut or tamper with the knee bolster in • No objects should be placed over or near the any way. airbag on the instrument panel, because any such •...
Page 62
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE head of each outboard occupant that reduce the potential WARNING! for side-impact head injuries. The SABIC airbags deploy • If your vehicle is equipped with left and right downward, covering both windows on the impact side. Supplemental Side Airbag Inflatable Curtain NOTE: (SABIC), do not stack luggage or other cargo up...
Page 63
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Here are some simple steps you can take to minimize the WARNING! (Continued) risk of harm from a deploying airbag: • If your vehicle is equipped with SABIC airbags, 1. Children 12 years and younger should always ride do not have any accessory items installed which buckled up in a rear seat.
Page 64
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE up in the rear seat. Never allow children to slide the 5. If the airbag system in this vehicle needs to be shoulder belt behind them or under their arm. modified to accommodate a disabled person, contact the customer center.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Based on the impact sensors signals, a central electronic WARNING! (Continued) ORC deploys the Advanced Front Airbags, Supplemental • Being too close to the steering wheel or instrument Side Airbag Inflatable Curtain (SABIC), and front seat panel during Advanced Front Airbag deployment belt pretensioners, as required, depending on the severity could cause serious injury, including death.
Page 66
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABIC will not deploy in all side collisions. SABIC The ORC contains a backup power supply system that deployment will depend on the severity and type of may deploy the airbags even if the battery loses power or collision.
Page 67
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 • Occupant Classification Module (OCM) WARNING! The OCM is located beneath the front passenger seat. The OCM classifies the occupant into categories based on the Ignoring the Airbag Warning Light in your instru- measurements made by the seat weight sensors.
Page 68
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE “PASS AIR BAG OFF” to show that the passenger The PAD indicator light should not be illuminated when Advanced Front Airbag will not inflate during a collision an adult passenger is properly seated in the front passen- requiring airbag deployment.
Page 69
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Drivers and adult passengers should verify that the PAD WARNING! Indicator Light is not illuminated when an adult is riding in the front passenger seat. If an adult occupant’s weight Never place a rear facing infant seat in front of an is transferred to another part of the vehicle (like the door airbag.
Page 70
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If there is a fault present in the airbag system, the Airbag Driver And Passenger Advanced Front Airbag Warning Light (a red light located in the center of the Inflator Units instrument cluster directly in front of the driver) will be The Driver And Passenger Advanced Front Airbag turned on.
Page 71
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Along with seat belts and pretensioners, Advanced Front A quantity of non-toxic gas is generated to inflate the side Airbags work with the knee bolsters to provide improved curtain airbag. The inflating side curtain airbag pushes protection for the driver and front passenger.
Page 72
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The following requirements must be strictly adhered to: WARNING! • Do not modify the front passenger seat assembly or If your vehicle is equipped with left and right components in any way. Supplemental Side Airbag Inflatable Curtains •...
Page 73
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 event the ORC will determine whether to have the WARNING! Enhanced Accident Response System perform the follow- ing functions: Unapproved modifications or service procedures to the front passenger seat assembly, its related compo- •...
Page 74
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you do have a collision which deploys the airbags, any throat irritation, move to fresh air. If the irritation or all of the following may occur: continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s in- •...
Page 75
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Maintaining Your Airbag System WARNING! (Continued) • Do not attempt to modify any part of your airbag WARNING! system. The airbag may inflate accidentally or may • Modifications to any part of the airbag system not function properly if modifications are made.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Warning Light NOTE: If the speedometer, tachometer, or any engine You will want to have the airbags ready to related gauges are not working, the Occupant Restraint inflate for your protection in a collision. The Controller (ORC) may also be disabled.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 • How various systems in your vehicle were operating; To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. • Whether or not the driver and passenger safety belts In addition to the vehicle manufacturer, other parties were buckled/fastened;...
Page 78
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE enough for an adult safety belt. Always check the child Infants And Child Restraints seat Owner’s Manual to ensure you have the right seat • Safety experts recommend that children ride for your child. Use the restraint that is correct for your rearward-facing in the vehicle until they are at least child.
Page 79
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Here are some tips for getting the most out of your child WARNING! restraint: • Rearward-facing child seats must never be used in • Before buying any restraint system, make sure that it the front seat of a vehicle with the front passenger has a label certifying that it meets all applicable safety airbag unless the airbag is turned off.
Page 80
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • In the rear seat, you may have trouble tightening the designed to keep the lap portion tight around the child restraint so that it is not necessary to use a locking clip. lap/shoulder belt on the child restraint because the If the seat belt has a cinching latch plate, pulling up on buckle or latch plate is too close to the belt path...
Page 81
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 than one year. These child seats are also held in the WARNING! vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system (refer to LATCH — Child Seat When your child restraint is not in use, secure it in Anchorage System.) the vehicle with the seat belt or remove it from the vehicle.
Page 82
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The lap portion should be low on the hips and as snug introduced over a period of years, child restraint systems as possible. having attachments for those anchorages will continue to also have features for installation using the vehicle’s seat •...
Page 83
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 type of lower attachment, never install LATCH- The rear seat lower anchorages are round bars located at compatible child seats so that two seats share a common the rear of the seat cushion where it meets the seatback, lower anchorage.
Page 84
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In addition, there are tether strap anchorages behind each means of adjusting the tension in the strap. Forward- rear seating position located on the back of the seat. facing toddler restraints and some rear-facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap.
Page 85
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 downward into the seat, removing slack in the straps belt. However, any seat belt system may loosen with according to the child restraint manufacturer’s instruc- time, so check the belt occasionally and pull it tight if tions.
Page 86
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the belt still can’t be tightened, or if pulling and pushing on the restraint loosens the belt, you may need to do something more. Disconnect the latch plate from the buckle, turn the buckle around, and insert the latch plate into the buckle again.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 ENGINE BREAK-IN RECOMMENDATIONS WARNING! A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. An incorrectly anchored tether strap could lead to increased head motion and possible injury to the Drive moderately during the first 300 miles (500 km).
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A new engine may consume some oil during its first few WARNING! (Continued) thousand miles (kilometers) of operation. This should be • It is extremely dangerous to ride in a cargo area, considered a normal part of the break-in and not inter- inside or outside of a vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Exhaust Gas If you are required to drive with the trunk/liftgate open, make sure that all windows are closed and the climate WARNING! control BLOWER switch is set at high speed. DO NOT use the recirculation mode.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The Defroster Vehicle Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to Seat Belts feel the air directed against the windshield. See your Inspect the belt system periodically, checking for cuts, authorized dealer for service if your defroster is frays, and loose parts.
Page 91
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Al- Pedals that cannot move freely can cause loss of ways properly reinstall and secure floor mats that vehicle control and increase the risk of serious per- have been removed for cleaning.
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for positive closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror. The mirror should be adjusted to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Page 98
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE to the left of the button will illuminate to indicate when CAUTION! the dimming feature is activated. The sensor to the right of the button does not illuminate. To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Outside Mirrors Power Mirrors To receive maximum benefit, adjust the outside mirror(s) The power mirror switch is located on the driver’s door to center on the adjacent lane of traffic with a slight trim panel.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Illuminated Vanity Mirrors — If Equipped Sun Visor “Slide-On-Rod” Feature An illuminated vanity mirror is on each sun visor. To use The sun visor “Slide-On-Rod” feature allows for addi- the mirror, rotate the sun visor down and swing the tional flexibility in positioning the visor to block out the mirror cover upward.
Page 101
• www.chrysler.com/uconnect allows up to seven mobile phones to be linked to the system. Only one linked (or paired) mobile phone can be • www.dodge.com/uconnect used with the system at a time. The system is available in • www.jeep.com/uconnect English, Spanish, or French languages.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone Button The Uconnect™ Phone is fully integrated with the vehi- The radio or steering wheel controls (if cle’s audio system. The volume of the Uconnect™ Phone equipped) will contain the two control buttons can be adjusted either from the radio volume control (Uconnect™...
Page 103
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • For certain operations, compound commands can be Help Command used. For example, instead of saying “Setup” and then If you need assistance at any prompt, or if you want to “Phone Pairing”, the following compound command know your options at any prompt, say “Help”...
Page 104
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For identification purposes, you will be prompted to To complete the pairing process, you will need to refer- ence your mobile phone Owner’s Manual. The give the Uconnect™ Phone a name for your mobile Uconnect™...
Page 105
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • The system will prompt you to say the name of the Dial By Saying A Number person you want to call. • Press the button to begin. • After the “Ready” prompt and the following beep, say •...
Page 106
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say The Uconnect™ Phone will allow you to enter up to 32 “Phonebook New Entry”. names in the phonebook with each name having up to four associated phone numbers and designations.
Page 107
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 • Automatic download and update, if supported, begins • This downloaded phonebook cannot be edited or as soon as the Bluetooth wireless phone connection is deleted on the Uconnect™ Phone. These can only be made to the Uconnect™...
Page 108
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Edit Uconnect™ Phonebook Entries • The phone handset must support Bluetooth OBEX NOTE: transfers of phonebook entries to use this feature. • Editing names in the phonebook is recommended • Some phones cannot send phonebook entries if they when the vehicle is not in motion.
Page 109
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 • After you enter the Phonebook Delete menu, you will After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish the phonebook, call the number you just edited, or return to delete.
Page 110
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete/Erase “All” Uconnect™ Phonebook Entries List All Names In The Uconnect™ Phonebook • Press the • Press the button to begin. button to begin. • After the “Ready” prompt and the following beep, say •...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Phone Call Features Answer Or Reject An Incoming Call — Call The following features can be accessed through the Currently In Progress Uconnect™ Phone if the feature(s) are available on your If a call is currently in progress and you have another mobile service plan.
Page 112
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE in progress. To go back to the first call, refer to “Toggling Conference Call Between Calls” in this section. To combine two calls, refer When two calls are in progress (one active and one on to “Conference Call”...
Page 113
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Call Termination Call Continuation To end a call in progress, momentarily press the Call continuation is the progression of a phone call on the Uconnect™ Phone after the vehicle ignition key has been button.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone Features Emergency Assistance If you are in an emergency and the mobile phone is Language Selection reachable: To change the language that the Uconnect™ Phone is • Pick up the phone and manually dial the emergency using: number for your area.
Page 115
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Canada and 060 for Mexico). The number dialed may Towing Assistance not be applicable with the available mobile service and If you need towing assistance: area. • Press the button to begin. • If supported, this number may be programmable on •...
Page 116
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Paging When calling a number with your Uconnect™ Phone that To learn how to page, refer to “Working with Automated normally requires you to enter in a touch-tone sequence Systems”. Paging works properly except for pagers of on your mobile phone keypad, you can press the certain companies, which time out a little too soon to button and say the sequence you wish to enter, followed...
Page 117
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 The Uconnect™ Phone will then send the corresponding Turning Confirmation Prompts ON/OFF phone number associated with the phonebook entry, as Turning confirmation prompts off will stop the system tones over the phone. from confirming your choices (e.g., the Uconnect™ Phone will not repeat a phone number before you dial it).
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dialing Using The Mobile Phone Keypad Mute/Un-Mute (Mute OFF) You can dial a phone number with your mobile phone When you mute the Uconnect™ Phone, you will still be keypad and still use the Uconnect™ Phone (while dialing able to hear the conversation coming from the other via the mobile phone keypad, the user must exercise party, but the other party will not be able to hear you.
Page 119
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • When prompted, say “List Phones”. from your Uconnect™ Phone paired mobile phone to the Uconnect™ Phone or vice versa, press the button • The Uconnect™ Phone will play the phone names of and say “Transfer Call”.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone Things You Should Know About Your Uconnect™ call. If the selected phone is not available, the Phone Uconnect™ Phone will return to using the highest Uconnect™...
Page 121
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 You can either press the Uconnect™ Phone button to Voice Command restore the factory setting or repeat the words and • For best performance, adjust the rearview mirror to phrases when prompted by the Uconnect™ Phone. For provide at least ⁄...
Page 122
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • dry weather condition. • You can say “O” (letter “O”) for “0” (zero). •...
Page 123
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 • fully closed windows, Uconnect™ Phone can read or send new messages on • dry weather conditions, and your phone. • operation from the driver’s seat. Read Messages: • Performance, such as audio clarity, echo, and loudness If you receive a new text message while your phone is to a large degree rely on the phone and network, and connected to Uconnect™...
Page 124
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages: 3. Where are you? You can send messages using Uconnect™ Phone. To send 4. I need more direction. a new message: 5. L O L • Press the button. 6. Why •...
Page 125
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 16. Can this wait? Bluetooth Communication Link Mobile phones have been found to lose connection to the 17. Bye for now Uconnect™ Phone. When this happens, the connection 18. When can we meet can generally be reestablished by switching the phone off/on.
Page 126
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 127
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125...
Page 128
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 129
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 130
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 General Information NOTE: Take care to speak into the Voice Interface This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a...
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If you do not say a command within a few When using this system, you should speak clearly and at seconds, the system will present you with a list of a normal speaking volume. options.
Page 133
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • “Memo” (to switch to the memo recorder) Changing the Volume • “System Setup” (to switch to system setup) 1. Start a dialogue by pressing the Voice Command button. Radio AM (or Radio Long Wave or Radio Medium Wave —...
Page 134
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Previous Channel” (to select the previous channel) Radio FM To switch to the FM band, say “FM” or “Radio FM”. In • “List Channel” (to hear a list of available channels) this mode, you may say the following commands: •...
Page 135
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Memo − “Previous” (to play the previous memo) To switch to the voice recorder mode, say “Memo”. In − “Delete” (to delete a memo) this mode, you may say the following commands: • “Delete All” (to delete all memos) •...
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Language Spanish” 2. Repeat the words and phrases when prompted by Uconnect™ Voice. For best results, the “Voice Training” • “Tutorial” session should be completed when the vehicle is parked, • “Voice Training” engine running, all windows closed, and the blower fan switched off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 WARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. •...
Page 138
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting The Seat Up Or Down WARNING! (Continued) The height of the seats can be adjusted up or down. Pull • Seats should be adjusted before fastening the upward or push downward on the seat switch, the seat seatbelts and while the vehicle is parked.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Heated Seats — If Equipped When the HIGH-level setting is selected, the heater will On some models, the front driver and passenger seats provide a boosted heat level during the first four minutes may be equipped with heaters in both the seat cushions of operation.
Page 140
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Persons who are unable to feel pain to the skin Repeated overheating of the seat could damage the because of advanced age, chronic illness, diabetes, heating element and/or degrade the material of the spinal cord injury, medication, alcohol use, ex- seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Front Manual Seat Adjustment While sitting in the seat, lift up on the bar located and For models equipped with manual seats, the driver and move the seat forward or rearward. Release the bar once passenger seats can be adjusted forward or rearward by you have reached the desired position.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Seat — Manual Recline WARNING! To recline the seatback, lift the recline lever, located on the outboard side of the seat, lean back and release the Do not ride with the seatback reclined so that the lever when you reach the desired position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 WARNING! The head restraints for all occupants must be prop- erly adjusted prior to operating the vehicle or occu- pying a seat. Head restraints should never be ad- justed while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
Page 144
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. Refer to “Occupant Re- straints”...
Page 145
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Active Head Restraint (Normal Position) Active Head Restraint (Tilted)
Page 146
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! • The head restraints should only be removed by quali- • Do not place items over the top of the Active Head fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- Restraint, such as coats, seat covers or portable rized dealer.
Page 147
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Static Head Restraints — Rear Seats NOTE: • The head restraints should only be removed by quali- The two outboard seats are equipped with adjustable head restraints. To raise the head restraint, pull upward fied technicians, for service purposes only.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 60/40 Split Folding Rear Seat with Fold-Flat WARNING! Feature To provide additional storage area, each rear seat can be Do not ride with the seatback reclined so that the folded flat to allow for extended cargo space and still shoulder belt is no longer resting against your chest.
Page 149
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. •...
Page 150
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Raise Rear Seat Recliner Adjustment If locked in the folded position, pull the release strap The rear seatback also reclines for additional passenger (toward the front of the vehicle). comfort. Pull the release strap while sitting in the rear seat to recline the seatback.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. TO OPEN AND CLOSE THE HOOD To open the hood, there are two latches that must be released.
Page 152
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Push the safety latch lever to the right. It is located CAUTION! between the grille and hood opening left of the center. To prevent possible damage: • Do not slam the hood to close it. •...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights and Parking Lights To change the brightness of the instrument panel lights, Turn the end of the multifunction lever to the first detent rotate the center portion of the multifunction lever up or for parking lights and instrument panel lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Lights-On Reminder If the headlights or parking lights are on after the ignition is turned OFF, a chime will sound when the driver’s door is opened. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beams.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals NOTE: • If either light remains on and does not flash, or there is Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show a very fast flash rate, check for a defective outside light proper operation of the front and rear turn signal lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the park- ing lights or headlights are on.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE control is left in the dome light position and the key is not in the ignition. Turn the ignition switch ON to restore the overhead light operation. Daytime Brightness Feature Certain instrument panel components (odometer, radio display) can be illuminated at full brightness during the daytime.
Page 159
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Rotate the end of the lever upward to the third detent they are operating. The wipers will resume operation past the intermittent settings for high-speed wiper opera- when you turn the ignition switch back to the ON tion.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 NOTE: The wiper delay times depend on vehicle speed. If you activate the washer while the wiper control is in If the vehicle is moving less than 10 mph (16 km/h), the off position, the wipers will operate for two or three delay times will be doubled.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mist Feature TILT STEERING COLUMN Push downward on the windshield wiper/washer con- This feature allows you to tilt the steering column trol lever to activate a single wipe cycle to clear the upward or downward. The tilt lever is located on the windshield of road mist or spray from a passing vehicle.
Page 163
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED NOTE: In order to ensure proper operation, the Elec- When engaged, the Electronic Speed Control takes over tronic Speed Control System has been designed to shut the accelerator operation at speeds greater than 25 mph down if multiple Speed Control functions are operated at (40 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 brake or clutch pressure while slowing the vehicle will WARNING! deactivate speed control without erasing the set speed memory. Pressing the ON/OFF button or turning off the Leaving the Electronic Speed Control system on ignition switch erases the set speed memory.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To decrease speed while the Electronic Speed Control is On steep hills a greater speed loss or gain may occur so set, push down and hold the SET DECEL lever. If the it may be preferable to drive without Electronic Speed lever is continually held in the SET DECEL position, the Control.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 • If a ParkSense system malfunction occurs, a single System Usage Precautions chime will sound once per ignition cycle. In addition, NOTE: the Electronic Vehicle Information Center (EVIC) will • Ensure that the rear bumper is free of snow, ice, mud, display “SERVICE PARK ASSIST SYSTEM”...
Page 168
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) WARNING! • The vehicle must be driven slowly when using • Drivers must be careful when backing up even ParkSense to be able to stop in time when the when using the ParkSense Rear Park Assist Sys- obstacle is detected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Enabling and Disabling ParkSense WARNING! (Continued) There are times when you may want to disable Park- • Before using the ParkSense Rear Park Assist Sense , such as when towing a trailer. System, it is strongly recommended that the ball Vehicles Equipped With the Electronic Vehicle mount and hitch ball assembly is disconnected Information Center (EVIC)
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense Operation The warning display contains two sets of yellow and red ParkSense uses four sensors located in the rear bumper LEDs, one set to warn of obstacles behind the left rear of fascia to scan for obstacles up to 79 in (200 cm) away from the vehicle and the other set to warn of obstacles behind the rear bumper fascia.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 WARNING DISPLAY DISTANCES DISPLAY LED OBSTACLE DISTANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER Inner LED 79 in (200 cm) Yellow Sounds for ⁄ second 1st LED 51 in (130 cm) Yellow None 2nd LED...
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If “SERVICE PARK ASSIST SYSTEM” appears in the Electronic Vehicle Information Center (EVIC) after mak- ing sure the rear fascia/bumper is clean and clear of snow, ice, mud, dirt, or other obstruction, see your authorized dealer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Programming HomeLink WARNING! Before You Begin • Your motorized door or gate will open and close If you have not trained any of the HomeLink buttons, while you are training the Universal Transceiver. erase all channels before you begin training.
Page 174
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After training a HomeLink channel, if the garage Place the handheld transmitter 1–3 in (3-8 cm) away from the HomeLink button you wish to program door does not operate with HomeLink and the ga- while keeping the indicator light in view.
Page 175
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 This can usually be found where the hanging antenna 1. Firmly press and release the LEARN or TRAINING wire is attached to the garage door opener motor (it is button. The name and color of the button may vary by NOT the button normally used to open and close the manufacturer.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming successfully accepted the frequency signal. The indica- Canadian radio-frequency laws require transmitter sig- tor light will flash slowly and then rapidly when fully nals to “time-out” (or quit) after several seconds of trained.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Reprogramming A Single HomeLink Button The HomeLink Universal Transceiver is disabled when To reprogram a channel that has been previously trained, the Vehicle Security Alarm is active. follow these steps: Troubleshooting Tips 1. Turn the ignition switch to the ON/RUN position. If you are having trouble programming HomeLink , here are some of the most common solutions: 2.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located between the sun Canada RSS-210. Operation is subject to the following visors on the overhead console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Opening Sunroof — Express WARNING! Press the switch rearward and release it within one-half • Never leave unattended children in a vehicle with second and the sunroof will open automatically from any position. The sunroof will open fully and stop automati- the key in the ignition switch.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE position. The sunroof will close fully and stop automati- Pinch Protect Override cally. This is called “Express Close”. During Express If a known obstruction (ice, debris, etc.) prevents closing Close operation, any movement of the switch will stop and moves the sunroof in the opposite direction, press the sunroof.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Wind Buffeting Ignition Off Operation Wind buffeting can be described as the perception of For vehicles not equipped with the Electronic Vehicle pressure on the ears or a helicopter-type sound in the Information Center (EVIC), the power sunroof switch ears.
Page 182
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE available when the ignition switch is in the ON or ACC NOTE: • To ensure proper operation a MOPAR position. Insert the cigar lighter or accessory plug into the knob and outlet for use to ensure proper operation. To preserve the element must be used.
Page 183
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. •...
Page 184
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! CAUTION! (Continued) • After the use of high power draw accessories, or • Many accessories that can be plugged in draw long periods of the vehicle not being started (with power from the vehicle’s battery, even when not in accessories still plugged in), the vehicle must be use (i.e., cellular phones, etc.).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 CUPHOLDERS The rear passengers have cupholders at the rear of the There are two cupholders for the front seat passengers, center console. located in the center console. Rear Cupholders Front Cupholders...
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Front Storage Compartment The front storage compartment (located on the left side of Glove Box Storage Compartment the instrument panel) can hold cell phones, PDAs, and The glove box storage compartment is located on the other small items.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Console Storage Compartment The center console has a removable storage tray which To open, press the latch and lift the cover. can hold cell phones, PDAs, and other small items. Center Console Removable Storage Tray...
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES Cargo Light The cargo area light is activated by opening the liftgate, opening any door, or by rotating the dimmer control on the multifunction lever to the extreme top position. Cargo Tie-Down Hooks The tie-downs located on the cargo area floor should be used to safely secure loads when the vehicle is moving.
Page 189
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 WARNING! WARNING! (Continued) • Always place cargo evenly on the cargo floor. Put Cargo tie-down hooks are not safe anchors for a child heavier objects as low and as far forward as seat tether strap. In a sudden stop or accident a hook possible.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Load Floor — If Equipped The panel in the load floor is reversible for added utility. One side features a plastic lined tray which can hold a variety of items. The maximum load capacity of the load floor is 400 lbs (181 kg).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 2. Lift the cover. REAR WINDOW FEATURES 3. Flip the cover over, and lock panel back into position. Rear Window Wiper/Washer The rear wiper/washer is controlled by a rotary switch located on the control lever. The control lever is located on the right side of the steering column.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the switch upward to the first detent posi- mirrors. An indicator in the button will illuminate when tion for rear wiper operation. the rear window defroster is on. The rear window defroster automatically turns off after approximately NOTE: The rear wiper operates in an intermittent mode 10 minutes.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 NOTE: Metal rails/crossbars are offered by MOPAR CAUTION! (Continued) accessories. See your authorized dealer. • Do not use scrapers, sharp instruments, or abra- External racks do not increase the total load carrying sive window cleaners on the interior surface of the capacity of the vehicle.
Page 194
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) WARNING! • Place a blanket or other protection between the Cargo must be securely tied before driving your surface of the roof and the load. vehicle. Improperly secured loads can fly off the •...
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Electronic Vehicle Information Center (EVIC) Instrument Panel Features ....196 Displays ......218 Instrument Cluster .
Page 196
194 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operating Instructions - Radio Mode ..228 ▫ Operating Instructions (Uconnect™ Phone) — If Equipped ..... . 247 ▫...
Page 197
UNDERSTANDING YOUR INSTRUMENT PANEL 195 ▫ List Button (CD Mode For MP3 Play) ..267 CD/DVD Disc Maintenance ....274 ▫ Info Button (CD Mode For MP3 Play) ..268 Radio Operation And Mobile Phones .
198 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS CAUTION! 1. Fuel Gauge Driving with a hot engine cooling system could The fuel gauge shows level of fuel in tank when ignition damage your vehicle. If temperature gauge reads “H” switch is in the ON/RUN position. pull over and stop the vehicle.
Page 201
UNDERSTANDING YOUR INSTRUMENT PANEL 199 After the bulb check or when driving, if the driver’s seat WARNING! belt remains unbuckled, the Seat Belt Reminder Light will illuminate and the chime will sound. Refer to A hot engine cooling system is dangerous. You or “Occupant Restraints”...
Page 202
200 UNDERSTANDING YOUR INSTRUMENT PANEL normal, turn the engine off immediately and call for 10. Electronic Stability Control (ESC) Activation/ service. Refer to “If Your Engine Overheats” in “What To Malfunction Indicator Light — If Equipped Do In Emergencies” for further information. The “ESC Activation/Malfunction Indicator Light”...
Page 203
UNDERSTANDING YOUR INSTRUMENT PANEL 201 • Each time the ignition is turned to ON/RUN, the ESC continuous chime will sound to alert you to turn the system will be ON even if it was turned off previously. signals off. If either indicator flashes at a rapid rate, check for a defective outside light bulb.
Page 204
202 UNDERSTANDING YOUR INSTRUMENT PANEL Brake Booster has been detected by the Anti-Lock Brake WARNING! System (ABS) / Electronic Stability Program (ESP) sys- tem. In this case, the light will remain on until the If the Transmission Temperature Warning Light is condition has been corrected.
Page 205
UNDERSTANDING YOUR INSTRUMENT PANEL 203 If brake failure is indicated, immediate repair is neces- unless the parking brake is applied or a brake fault is sary. detected. If the light does not illuminate, have the light inspected by an authorized dealer. WARNING! The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN posi-...
Page 206
204 UNDERSTANDING YOUR INSTRUMENT PANEL the light is flashing when the engine is running, imme- while driving, turn off some of the vehicle’s non-essential diate service is required and you may experience reduced electrical devices or increase engine speed (if at idle). If performance, an elevated/rough idle or engine stall and the charging system light remains on, it means that the your vehicle may require towing.
Page 207
UNDERSTANDING YOUR INSTRUMENT PANEL 205 19. Anti-Lock Brake (ABS) Light 21. Oil Pressure Warning Light This light monitors the Anti-Lock Brake System This light indicates low engine oil pressure. The (ABS). The light will turn on when the ignition light should turn on momentarily when the engine switch is turned to the ON/RUN position and is started.
Page 208
206 UNDERSTANDING YOUR INSTRUMENT PANEL dealer as soon as possible. Refer to “Occupant Restraints” placard or tire inflation pressure label. (If your vehicle in “Things To Know Before Starting Your Vehicle” for has tires of a different size than the size indicated on the further information.
Page 209
UNDERSTANDING YOUR INSTRUMENT PANEL 207 maintain correct tire pressure, even if under-inflation has tires or wheels on your vehicle, to ensure that the not reached the level to trigger illumination of the TPMS replacement or alternate tires and wheels allow the TPMS low tire pressure telltale.
Page 210
208 UNDERSTANDING YOUR INSTRUMENT PANEL 26. Odometer / Trip Odometer Display Area Vehicle Odometer Messages The odometer display shows the total distance the ve- When the appropriate conditions exist, the following hicle has been driven. The trip odometer shows indi- messages will display in the odometer: vidual trip mileage.
Page 211
UNDERSTANDING YOUR INSTRUMENT PANEL 209 ECO / ECO-ON (Fuel Saver Indicator) — If Equipped A loose, improperly installed, or damaged fuel filler cap The ECO-ON indicator will illuminate when you are may also turn on the Malfunction Indicator Light (MIL). driving in a fuel efficient manner and can be used to noFUSE modify driving habits in order to increase fuel economy.
Page 212
210 UNDERSTANDING YOUR INSTRUMENT PANEL reset, this message will continue to display each time you 27. Malfunction Indicator Light (MIL) turn the ignition switch to the ON/RUN position. To turn The Malfunction Indicator Light (MIL) is part of off the message temporarily, press and release the TRIP an onboard diagnostic system, called OBD, that ODOMETER button on the instrument cluster.
Page 213
UNDERSTANDING YOUR INSTRUMENT PANEL 211 28. Cruise Indicator — If Equipped CAUTION! This indicator lights when the electronic speed control system is turned on. Prolonged driving with the MIL on could cause damage to the engine control system. It also could 29.
212 UNDERSTANDING YOUR INSTRUMENT PANEL Resetting the Trip Odometer 31. 4WD Indicator — If Equipped Display the trip mileage that you want to reset, “Trip A” This light indicates the vehicle is in four-wheel or “Trip B.” Then push and hold the button (approxi- drive and 4LOCK.
UNDERSTANDING YOUR INSTRUMENT PANEL 213 be driven several minutes before the updated tempera- ture is displayed. Engine temperature can also affect the displayed temperature, therefore temperature readings are not updated when the vehicle is not moving. Compass/Trip Computer Display Control Buttons Press and release the odometer/trip odometer reset but- ton (right side of the instrument cluster) to access the compass/trip computer displays.
214 UNDERSTANDING YOUR INSTRUMENT PANEL The compass/trip computer, when the appropriate con- Trip A ditions exist, will show the following messages in the Shows the total distance traveled for trip A since the last odometer display: reset. • Door Ajar (door) Trip B Shows the total distance traveled for trip B since the last •...
Page 217
UNDERSTANDING YOUR INSTRUMENT PANEL 215 the vehicle is driven, per the zone map. Once properly set, the compass will automatically compensate for the differences and provide the most accurate compass head- ing. NOTE: • A good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc.
Page 218
216 UNDERSTANDING YOUR INSTRUMENT PANEL To Set The Variance Manual Compass Calibration Start the engine and leave the transmission gear selector If the compass appears erratic inaccurate or abnormal, lever in the PARK position. Press and hold the CMTC you may wish to calibrate the compass. Prior to calibrat- reset button (for approximately ten seconds) until the ing the compass, make sure the proper zone is selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 ELECTRONIC VEHICLE INFORMATION CENTER This system conveniently allows the driver to select a (EVIC) — IF EQUIPPED variety of useful information by pressing the switches The Electronic Vehicle Information Center (EVIC) fea- mounted on the steering wheel. The EVIC consists of the tures a driver-interactive display that is located in the following: instrument cluster.
218 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by Press release COMPASS/ pressing the following buttons mounted on the steering TEMPERATURE button to display one of eight wheel: compass readings and the outside temperature. MENU Button Electronic Vehicle Information Center (EVIC) Press and release the MENU button and the Displays...
UNDERSTANDING YOUR INSTRUMENT PANEL 219 • Left/right front door ajar (one or more, with a single • Right rear low pressure (with a single chime). Refer to chime if speed is above 1 mph/1.6 km/h) “Tire Pressure Monitoring System” in “Starting And Operating”.
220 UNDERSTANDING YOUR INSTRUMENT PANEL will flash in the EVIC display for approximately 10 sec- NOTE: If the indicator message illuminates when you onds after a single chime has sounded to indicate the next start the engine, the oil change indicator system did not scheduled oil change interval.
Page 223
UNDERSTANDING YOUR INSTRUMENT PANEL 221 The Trip Functions mode displays the following informa- NOTE: Significant changes in driving style or vehicle tion: loading will greatly affect the actual drivable distance of the vehicle, regardless of the DTE displayed value. • Average Fuel Economy Shows the average fuel economy since the last reset.
222 UNDERSTANDING YOUR INSTRUMENT PANEL To Reset The Display be driven several minutes before the updated tempera- Reset will only occur while a resettable function is being ture is displayed. Engine temperature can also affect the displayed. Press and release the FUNCTION SELECT displayed temperature, therefore temperature readings button once to clear the resettable function being dis- are not updated when the vehicle is not moving.
Page 225
UNDERSTANDING YOUR INSTRUMENT PANEL 223 metallic objects) until the CAL indicator displayed in the 4. Press and release the FUNCTION SELECT button to EVIC turns off. The compass will now function normally. start the calibration. The CAL indicator will be displayed in the EVIC.
224 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Magnetic materials should be kept away from 1. Turn the ignition switch ON. the top of the right rear quarter window. This is where 2. Press and hold the COMPASS button for approxi- the compass sensor is located. mately two seconds.
Page 227
UNDERSTANDING YOUR INSTRUMENT PANEL 225 Use the SCROLL button to display one of the following NEUTRAL position and the driver’s door is opened. To choices: make your selection, press and release the FUNCTION SELECT button until ON or OFF appears. Language When in this display you may select one of five lan- Remote Key Unlock...
Page 228
226 UNDERSTANDING YOUR INSTRUMENT PANEL Remote Key Lock feature. To make your selection, press Turn Headlights On with Remote Key Unlock and release the FUNCTION SELECT button until ON or When this feature is selected, the headlights will activate OFF appears. and remain on for up to 90 seconds when the doors are unlocked with the RKE transmitter.
Page 229
UNDERSTANDING YOUR INSTRUMENT PANEL 227 Enable/Disable the Rear Park Assist System Display Units of Measure in The Rear Park Assist system will scan for objects behind The EVIC and navigation system (if equipped) can be the vehicle when the transmission is in the REVERSE changed between English and Metric units of measure.
228 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 230 (REQ) — AM/FM STEREO Operating Instructions - Radio Mode RADIO AND 6–DISC CD/DVD CHANGER NOTE: The ignition switch must be in the ON or ACC (MP3/WMA AUX JACK) position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate.
Page 231
UNDERSTANDING YOUR INSTRUMENT PANEL 229 to seek up and the left switch to seek down. The radio If your vehicle is not equipped with or this feature is not will remain tuned to the new station until you make available on your vehicle, a “Not Equipped With another selection.
Page 232
230 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure INFO Button Press the INFO button for an RDS station (one with call 1. Press and hold the TIME button until the hours blink. letters displayed). The radio will return a Radio Text 2.
Page 233
UNDERSTANDING YOUR INSTRUMENT PANEL 231 Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the MUSIC TYPE Button mid-range tones.
Page 234
232 UNDERSTANDING YOUR INSTRUMENT PANEL 16-Digit Character 16-Digit Character Program Type Program Type Display Display Classic Rock Cls Rock Soft Soft College College Soft Rock Soft Rck Country Country Soft Rhythm and Blues Soft R & B Foreign Language Language Sports Sports Information...
Page 235
UNDERSTANDING YOUR INSTRUMENT PANEL 233 • Subtitle – Repeatedly pressing SELECT will switch SETUP Button Pressing the SETUP button allows you to select between subtitles to different subtitle languages that are the following items: available on the disc (if equipped). •...
Page 236
234 UNDERSTANDING YOUR INSTRUMENT PANEL • VES™ Lock - Locks out rear VES™ remote controls (if language supported by disc). If you want to select a equipped). language not listed, then scroll down and select other. Enter the four-digit country code using the TUNE/ •...
Page 237
UNDERSTANDING YOUR INSTRUMENT PANEL 235 the TUNE/SCROLL control knob to scroll up and down auto-play the main title. In such cases, use the MENU to select the number and then push to select. button on the remote control to select desired title to play. Subtitles —...
236 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by Operation Instructions - (DISC MODE for CD and repeating the above procedure with this exception: Press MP3/WMA Audio Play, DVD-VIDEO) the SET button twice and SET 2 will show in the display The radio DVD player and many DVD discs are coded by window.
Page 239
UNDERSTANDING YOUR INSTRUMENT PANEL 237 NOTE: The ignition switch must be in the ON or ACC Eject Button — Ejecting Compact Disc(s) position to operate the radio. Press the EJECT button and the pushbutton with the corresponding number (1-6) where the LOAD Button —...
238 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (CD MODE) Notes On Playing MP3/WMA Files Press the SCAN button to scan through each track on the The radio can play MP3/WMA files; however, acceptable CD currently playing. MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the TIME Button (CD MODE) following restrictions.
Page 241
UNDERSTANDING YOUR INSTRUMENT PANEL 239 The radio uses the following limits for file systems: If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ • Maximum number of directory levels: 8 WMA tracks on that disc.
Page 242
240 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3/WMA Files MPEG Sampling Fre- Bit Rate (kbps) When a medium containing MP3/WMA data is loaded, Specification quency (kHz) the radio checks all files on the medium. If the medium 320, 256, 224, contains a lot of folders or files, the radio will take more MPEG-1 Audio 192, 160, 128,...
UNDERSTANDING YOUR INSTRUMENT PANEL 241 LIST Button (DISC Mode for MP3/WMA Play) Press and hold the INFO button again for three seconds Pressing the LIST button will bring up a list of all folders to return to elapsed time display. on the disc.
242 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (Auxiliary Mode) Operating Instructions — Voice Command System No function. (If Equipped) For the radio, Refer to “Voice Command” in the EJECT Button (Auxiliary Mode) Uconnect™ User Manual located on the DVD for further No function.
Page 245
UNDERSTANDING YOUR INSTRUMENT PANEL 243 Macrovision sports, news, entertainment, and programming for chil- This product incorporates copyright protection technol- dren, directly from its satellites and broadcasting studios. ogy that is protected by U.S. patents and other intellec- NOTE: Sirius service is not available in Hawaii and has tual property rights.
Page 246
244 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Serial Number/Sirius Identification Selecting Uconnect™ Multimedia (Satellite) Mode Number (ESN/SID) Press the SAT button until SAT appears in the display. A Please have the following information available when CD may remain in the radio while in the Satellite radio calling: mode.
Page 247
UNDERSTANDING YOUR INSTRUMENT PANEL 245 • Dense tree coverage may interrupt reception in the SCAN Button form of short audio mutes. Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before con- •...
Page 248
246 UNDERSTANDING YOUR INSTRUMENT PANEL TUNE Control (Rotary) SETUP Button Turn the rotary TUNE/SCROLL control knob clockwise Pressing the SETUP button allows you to select the to increase or counterclockwise to decrease the channel. following items: • Display Sirius ID number — Press the AUDIO/ MUSIC TYPE Button Pressing this button once will turn on the Music Type SELECT button to display the Sirius ID number.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 the SET button twice and SET 2 will show in the display MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ window. Each button can be set for SET 1 and SET 2. This RHB) CD/DVD/HDD/NAV — IF EQUIPPED allows a total of 12 Satellite channels to be stored into NOTE: The sales code is located on the lower right side pushbutton memory.
248 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 (SALES CODE RES) Operating Instructions — Radio Mode NOTE: The radio sales code is located on the lower right NOTE: The ignition switch must be in the ON or ACC side of the radio faceplate. position to operate the radio.
Page 251
UNDERSTANDING YOUR INSTRUMENT PANEL 249 to seek up and the left switch to seek down. The radio 4. Adjust the minutes using the right side TUNE/ will remain tuned to the new station until you make SCROLL control knob. Press the TUNE/SCROLL control another selection.
Page 252
250 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the AM/FM Button mid-range tones.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 SET 2 in both AM and FM. This allows a total of 12 AM Operation Instructions — CD MODE For CD And and 12 FM stations to be stored into pushbutton memory. MP3 Audio Play The stations stored in SET 2 memory can be selected by NOTE: pressing the pushbutton twice.
Page 254
252 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD ON, the unit will switch from radio to CD mode and Press the EJECT button to eject the CD. begin to play when you insert the disc.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 the current selection. Pressing and holding the SEEK SET/RND Button (Random Play Button) button will allow faster scrolling through the tracks in Press this button while the CD is playing to activate CD and MP3 modes. Random Play.
Page 256
254 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Medium Formats (File Systems) exceeding 20 folders will result in this display. With The medium formats supported by the radio are ISO 9660 200 files, exceeding 50 folders will result in this Level 1 and Level 2 and includes the Joliet extension. display.) When reading discs recorded using formats other than •...
Page 257
UNDERSTANDING YOUR INSTRUMENT PANEL 255 Supported MP3 File Formats MPEG Sampling Fre- Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification quency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 160, 128, 144, extension may cause playback problems.
256 UNDERSTANDING YOUR INSTRUMENT PANEL Loading times for playback of MP3 files may be affected Operation Instructions - Auxiliary Mode by the following: The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an •...
UNDERSTANDING YOUR INSTRUMENT PANEL 257 MEDIA CENTER 130 WITH SATELLITE RADIO Operating Instructions — Radio Mode (SALES CODE RES+RSC) NOTE: The ignition switch must be in the ON or ACC NOTE: The radio sales code is located on the lower right position to operate the radio.
Page 260
258 UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio Phone Button Uconnect™ Phone — If Equipped will remain tuned to the new station until you make Press this button to operate the Uconnect™ Phone feature another selection.
Page 261
UNDERSTANDING YOUR INSTRUMENT PANEL 259 3. After adjusting the hours, press the right side TUNE/ INFO Button SCROLL control knob to set the minutes. The minutes Press the INFO button for an RDS station (one with call will begin to blink. letters displayed).
Page 262
260 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the MUSIC TYPE Button mid-range tones.
Page 263
UNDERSTANDING YOUR INSTRUMENT PANEL 261 16-Digit Character 16-Digit Character Program Type Program Type Display Display Classic Rock Cls Rock Soft Soft College College Soft Rock Soft Rck Country Country Soft Rhythm and Blues Soft R&B Foreign Language Language Sports Sports Information Inform Talk...
Page 264
262 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button window. Select the button (1–6) you wish to lock onto this Pressing the SETUP button allows you to select between station and press and release that button. If a button is the following items: not selected within five seconds after pressing the SET/ RND button, the station will continue to play but will not •...
UNDERSTANDING YOUR INSTRUMENT PANEL 263 Buttons 1 - 6 Inserting Compact Disc(s) These buttons tune the radio to the stations that you Gently insert one CD into the CD player with the CD commit to pushbutton memory (12 AM and 12 FM label facing up.
Page 266
264 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Ejecting with the ignition OFF is not allowed on CAUTION! (Continued) convertible or soft-top models (if equipped). • Do not use adhesive labels. These labels can peel SEEK Button away and jam the player mechanism. Press the right SEEK button for the next selection on the •...
UNDERSTANDING YOUR INSTRUMENT PANEL 265 AM/FM Button Supported Media (Disc Types) Press the button to select either AM or FM mode. The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Supported Medium Formats (File Systems) Random Play.
Page 268
266 UNDERSTANDING YOUR INSTRUMENT PANEL a number instead. With a maximum number of files, Supported MP3 File Formats exceeding 20 folders will result in this display. With The radio will recognize only files with the *.MP3 exten- 200 files, exceeding 50 folders will result in this sion as MP3 files.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 Loading times for playback of MP3 files may be affected MPEG Sampling Fre- Bit Rate (kbps) by the following: Specification quency (kHz) • Media - CD-RW media may take longer to load than 160, 128, 144, MPEG-2 Audio 112, 96, 80, 64, CD-R media...
268 UNDERSTANDING YOUR INSTRUMENT PANEL begin playing the files contained in that folder (or the Operation Instructions - Auxiliary Mode next folder in sequence if the selection does not contain The auxiliary (AUX) jack is an audio input jack which playable files).
UNDERSTANDING YOUR INSTRUMENT PANEL 269 Uconnect™ Multimedia (Satellite Radio) — If information, call the toll-free number 888-539-7474, or Equipped visit the Sirius web site at www.sirius.com, or at www- Satellite radio uses direct satellite-to-receiver broadcast- .siriuscanada.ca for Canadian residents. ing technology to provide clear digital sound, coast to Electronic Serial Number/Sirius Identification coast.
Page 272
270 UNDERSTANDING YOUR INSTRUMENT PANEL Sirius ID number will display. The Sirius ID number Reception Quality display will time out in two minutes. Press any button on Satellite reception may be interrupted due to one of the the radio to exit this screen. following reasons: •...
Page 273
UNDERSTANDING YOUR INSTRUMENT PANEL 271 SEEK Buttons additional three seconds will make the radio display the Press and release the SEEK buttons to search for the next Song Title all of the time (press and hold again to return channel in Satellite mode. Press the right switch to seek to normal display).
Page 274
272 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button again to select the music SET Button – To Set the Pushbutton Memory type. When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. By pressing the SEEK button when the Music Type The symbol SET 1 will now show in the display window.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 Buttons 1 - 6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features If Your Vehicle”.
274 UNDERSTANDING YOUR INSTRUMENT PANEL The button located in the center of the right-hand control beginning of the current track or to the beginning of the will switch modes to Radio or CD. previous track, if it is within one second after the current track begins to play.
UNDERSTANDING YOUR INSTRUMENT PANEL 275 3. Do not apply paper or tape to the disc; avoid scratch- RADIO OPERATION AND MOBILE PHONES ing the disc. Under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from 4.
276 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Heating and Air Conditioning Blower Control Rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position.
Page 279
UNDERSTANDING YOUR INSTRUMENT PANEL 277 NOTE: If your air conditioning performance seems Panel lower than expected, check the front of the A/C con- Air is directed through the outlets in the instrument denser located in front of the radiator for an accumula- panel.
Page 280
278 UNDERSTANDING YOUR INSTRUMENT PANEL Floor NOTE: • The air conditioning compressor operates in Mix, Air is directed through the floor outlets with a small amount flowing through the defrost and side Defrost, or a blend of these modes, even if the Air window demist outlets.
Page 281
UNDERSTANDING YOUR INSTRUMENT PANEL 279 NOTE: Air Conditioning Control • Continuous use of the recirculation mode may make Press this button to engage the Air the inside air stuffy and window fogging may occur. Conditioning. A light will illuminate Extended use of this mode is not recommended. when the Air Conditioning System is engaged.
280 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Temperature Control (ATC) — If Operation of the system is quite simple. Equipped 1. Turn the Mode Control knob (on the right) and the Blower Control knob (on the left) to AUTO. NOTE: The AUTO position performs best for front seat occupants only.
Page 283
UNDERSTANDING YOUR INSTRUMENT PANEL 281 The recommended setting for maximum comfort is 72°F Blower Control (22°C) for the average person; however, this may vary. For full automatic operation or for automatic blower operation turn the NOTE: knob to AUTO position. In manual •...
Page 284
282 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 285
UNDERSTANDING YOUR INSTRUMENT PANEL 283 • Floor The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets.
Page 286
284 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control NOTE: • When the ignition switch is turned to the LOCK Press this button to turn on the air conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
UNDERSTANDING YOUR INSTRUMENT PANEL 285 • Most of the time, when in Automatic Operation, you Summer Operation can temporarily put the system into Recirculation The engine cooling system in air-conditioned vehicles Mode by pressing the Recirculation button. However, must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect under certain conditions, while in Automatic Mode, against engine overheating.
Page 288
286 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The windshield, is free of obstructions such as leaves. Leaves Defrost/Floor mode can be used to maintain a clear collected in the air intake may reduce airflow, and if they windshield and provide sufficient heating.
Page 289
UNDERSTANDING YOUR INSTRUMENT PANEL 287 Control Setting Suggestions for Various Weather Conditions...
Page 290
288 UNDERSTANDING YOUR INSTRUMENT PANEL...
STARTING AND OPERATING 293 STARTING PROCEDURES Normal Starting Before starting your vehicle, adjust your seat, adjust both NOTE: Normal starting of either a cold or a warm inside and outside mirrors, and fasten your seat belts. engine is obtained without pumping or pressing the accelerator pedal.
294 STARTING AND OPERATING Extreme Cold Weather (below –20°F or –29°C) WARNING! (Continued) To ensure reliable starting at these temperatures, the use • Do not attempt to push or tow your vehicle to get of an externally powered electric engine block heater it started.
STARTING AND OPERATING 295 With Tip Start CAUTION! If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” proce- To prevent damage to the starter, do not crank the dures, it may be flooded. To clear any excess fuel, press engine for more than 15 seconds at a time.
296 STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED AUTOMATIC TRANSMISSION The engine block heater warms the engine, and permits CAUTION! quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a Damage to the transmission may occur if the follow- grounded three-wire extension cord.
STARTING AND OPERATING 297 Key Ignition Park Interlock WARNING! This vehicle is equipped with a Key Ignition Park Inter- • It is dangerous to move the shift lever out of PARK lock which requires the shift lever to be placed in PARK prior to rotating the key to the LOCK position.
298 STARTING AND OPERATING Four–Speed Automatic Transmission – 3.7L Engine NOTE: Under extreme cold temperatures (-10°F (-23°C) and when in DRIVE, transmission operation may be briefly limited to only second gear operation. Normal operation will resume once the transmission temperature has risen to a suitable level.
Page 301
STARTING AND OPERATING 299 Never use PARK while the vehicle is in motion. Apply REVERSE the parking brake when leaving the vehicle in this range. This range is for moving the vehicle backward. Use only Always apply the parking brake first, then place the shift after the vehicle has come to a complete stop.
Page 302
300 STARTING AND OPERATING • vehicle speed is above approximately 30 mph 2 (Second) This range is used for moderate grades and to assist (48 km/h) braking on dry pavement or in mud and snow. Begins at • the TOW/HAUL button has not been activated a stop in low gear with automatic upshift to second gear.
Page 303
STARTING AND OPERATING 301 Transmission Limp Home Mode Transmission function is monitored for abnormal condi- tions. If a condition is detected that could result in transmission damage, the Transmission Limp Home Mode will be engaged. In this mode, the transmission will remain in second gear in any forward driving range.
302 STARTING AND OPERATING PARK, REVERSE, and NEUTRAL will continue to oper- self-calibrating; therefore, the first few shifts on a new ate. Only second gear range will operate in the DRIVE vehicle may be somewhat abrupt. This is a normal position.
STARTING AND OPERATING 303 Gear Ranges WARNING! NOTE: After selecting any gear range, wait a moment to • Never use the PARK position as a substitute for allow the selected gear to engage before accelerating. the parking brake. Always apply the parking This is especially important when the engine is cold.
Page 306
304 STARTING AND OPERATING NEUTRAL the transmission into third gear, the transmission will This range is used when vehicle is standing for pro- never shift above third gear, but can shift down into longed periods with engine running. Engine may be second gear or first gear, when needed.
Page 307
STARTING AND OPERATING 305 Overdrive Operation risen to a suitable level. Refer to the “Note” under The overdrive automatic transmission contains an elec- “Torque Converter Clutch” later in this section. tronically controlled fifth gear (OVERDRIVE). The trans- During cold temperature operation, you may notice mission will automatically shift from fourth gear to delayed upshifts depending on engine and transmission OVERDRIVE if the following conditions are present:...
Page 308
306 STARTING AND OPERATING To reset the transmission, use the following procedure: Torque Converter Clutch A feature designed to improve fuel economy has been 1. Stop the vehicle. included in the automatic transmission on your vehicle. 2. Move the shift lever to the PARK position. A clutch within the torque converter engages automati- cally at a calibrated speed at light throttle.
STARTING AND OPERATING 307 FOUR-WHEEL DRIVE OPERATION — IF EQUIPPED MP 143 Single-Speed Part-Time Transfer Case Operating Information/Precautions The transfer case is operated by the transfer case switch (located on the center console). Transfer Case Switch The electronically shifted transfer case provides two mode positions: •...
Page 310
308 STARTING AND OPERATING The electronically shifted transfer case is designed to be CAUTION! (Continued) driven in the two-wheel drive position (2WD) for normal • Do not attempt to make a shift while only the front street and highway conditions (dry hard surfaced roads). or rear wheels are spinning.
STARTING AND OPERATING 309 Shifting Procedure – Electronically Shifted must be in the ON position with the engine either Transfer Case RUNNING or OFF. This shift cannot be completed if the key is in the ACC position. NOTE: If any of the requirements to select a new transfer case position have not been met, the transfer case NOTE: •...
310 STARTING AND OPERATING characteristics give them a higher center of gravity than If for some reason the power assist is interrupted, it will ordinary cars. still be possible to steer your vehicle. Under these condi- tions, you will observe a substantial increase in steering An advantage of the higher ground clearance is a better effort, especially at very low vehicle speeds and during view of the road, allowing you to anticipate problems.
STARTING AND OPERATING 311 apparent, and/or the system is not functioning as antici- WARNING! pated. Coordinate inspection efforts through an autho- rized dealer. Continued operation with reduced power steering assist could pose a safety risk to yourself and others. CAUTION! Service should be obtained as soon as possible.
312 STARTING AND OPERATING If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied.
Page 315
STARTING AND OPERATING 313 NOTE: WARNING! • When the parking brake is applied and the transmis- • Never use the PARK position as a substitute for sion is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound the parking brake.
314 STARTING AND OPERATING computer to modulate hydraulic pressure, to prevent WARNING! (Continued) wheel lock-up and help avoid skidding on slippery • Always fully apply the parking brake when leav- surfaces. ing your vehicle or it may roll and cause damage or All vehicle wheels and tires must be the same size and injury.
Page 317
STARTING AND OPERATING 315 The ABS pump motor runs during the self-test at 12 mph WARNING! (Continued) (20 km/h) and during an ABS stop. The pump motor • The ABS cannot prevent collisions, including makes a low humming noise during operation, which is those resulting from excessive speed in turns, normal.
316 STARTING AND OPERATING • Do not “ride” the brakes by resting your foot on the build up between the tire tread and the road. This pedal. This could overheat the brakes and result in hydroplaning action can cause loss of traction, braking unpredictable braking action, longer stopping dis- ability, and control.
STARTING AND OPERATING 317 Anti-Lock Brake System (ABS) WARNING! This system aids the driver in maintaining vehicle control The Anti-Lock Brake System (ABS) cannot prevent under adverse braking conditions. The system controls the natural laws of physics from acting on the ve- hydraulic brake pressure to prevent wheel lockup and hicle, nor can it increase the traction afforded by help avoid skidding on slippery surfaces during braking.
318 STARTING AND OPERATING a limited slip differential and controls the wheel spin reduce brake pedal pressure unless braking is no longer across a driven axle. If one wheel on a driven axle is desired. Once the brake pedal is released, the BAS is spinning faster than the other, the system will apply the deactivated.
STARTING AND OPERATING 319 Electronic Roll Mitigation (ERM) WARNING! This system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the Many factors, such as vehicle loading, road condi- speed of the vehicle. When ERM determines that the rate tions and driving conditions, influence the chance of change of the steering wheel angle and vehicles speed that wheel lift or rollover may occur.
Page 322
320 STARTING AND OPERATING counteracting the oversteer or understeer condition. En- Light” also flashes when the TCS is active. If the “ESC gine power may also be reduced to help the vehicle Activation/Malfunction Indicator Light” begins to flash maintain the desired path. during acceleration, ease up on the accelerator and apply as little throttle as possible.
Page 323
STARTING AND OPERATING 321 ESC Operating Modes other stability features of ESC function normally. This The ESC system has two available operating modes in mode is intended to be used if the vehicle is in deep 2WD, 4WD Part Time, 4WD Full Time, and on 2WD snow, sand or gravel conditions and more wheel spin vehicles.
322 STARTING AND OPERATING ESC Activation/Malfunction Indicator Light and Malfunction Indicator Light” begins to flash during ac- ESC OFF Indicator Light celeration, ease up on the accelerator and apply as little The “ESC Activation/Malfunction Indicator throttle as possible. Be sure to adapt your speed and Light”...
STARTING AND OPERATING 323 TIRE SAFETY INFORMATION NOTE: • P (Passenger) - Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 326
324 STARTING AND OPERATING • High flotation tire sizing is based on U.S. design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 R15 LT. Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..
Page 327
STARTING AND OPERATING 325 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
326 STARTING AND OPERATING Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.
STARTING AND OPERATING 327 Tire Terminology and Definitions Term Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
328 STARTING AND OPERATING Tire Loading And Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle...
Page 331
STARTING AND OPERATING 329 Loading The combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the load carrying capacity of the tire on your vehicle. You the weight referenced here.
Page 332
330 STARTING AND OPERATING 5. Determine the combined weight of luggage and cargo NOTE: • The following table shows examples on how to calcu- being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity late total load, cargo/luggage, and towing capacities calculated in Step 4.
332 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
STARTING AND OPERATING 333 Tire Inflation Pressures WARNING! (Continued) Some vehicles may have Supplemental Tire Pressure • Unequal tire pressures from one side of the ve- Information for vehicle loads that are less than the hicle to the other can cause the vehicle to drift to maximum loaded vehicle condition.
334 STARTING AND OPERATING Inflation pressures specified on the placard are always inflation pressure should be increased by 3 psi (21 kPa), “cold tire inflation pressure.” Cold tire inflation pressure which equals 1 psi (7 kPa) for every 12°F (7°C) for this is defined as the tire pressure after the vehicle has not outside temperature condition.
STARTING AND OPERATING 335 Cuts and punctures in radial tires are repairable only in WARNING! the tread area because of sidewall flexing. Consult your authorized tire dealer for radial tire repairs. High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your Spare Tire Matching Original Equipped Tire and tires could cause them to fail.
336 STARTING AND OPERATING with one of the following types of non-matching tempo- the Tire and Loading Information Placard located on the rary use spares; compact, full size, or limited-use. driver’s side door opening or on the sidewall of the tire. Compact spare tire descriptions begin with the letter “T”...
STARTING AND OPERATING 337 your original equipment tire, replace (or repair) the WARNING! original equipment tire and reinstall on the vehicle at the first opportunity. Compact spares are for temporary emergency use only. With these spares, do not drive more than Limited-Use Spare –...
338 STARTING AND OPERATING WARNING! WARNING! Limited-use spares are for emergency use only. In- Fast spinning tires can be dangerous. Forces gener- stallation of this limited-use spare tire affects vehicle ated by excessive wheel speeds may cause tire dam- handling. With this tire, do not drive more than the age or failure.
STARTING AND OPERATING 339 Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread.
340 STARTING AND OPERATING Replacement Tires WARNING! The tires on your new vehicle provide a balance of many • Do not use a tire, wheel size or rating other than characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manu- that specified for your vehicle.
STARTING AND OPERATING 341 WARNING! (Continued) CAUTION! • Failure to equip your vehicle with tires having To avoid damage to your vehicle, tires or chains, adequate speed capability can result in sudden tire observe the following precautions: failure and loss of vehicle control. •...
342 STARTING AND OPERATING CAUTION! (Continued) CAUTION! • Do not drive for a prolonged period on dry pave- Do not use tire chains on vehicles equipped with ment. tires other than P235/65R17 and P225/75R16 tires. • Observe the tire chain manufacturer’s instructions There may not be adequate clearance for the chains on method of installation, operating speed, and and you are risking structural or body damage to...
Page 345
STARTING AND OPERATING 343 The suggested rotation method is the “forward-cross” CAUTION! shown in the following diagram. Proper operation of four-wheel drive vehicles de- pends on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the transfer case.
344 STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure if The Tire Pressure Monitor System (TPMS) will warn the the tire pressure falls below the low-pressure warning driver of a low tire pressure based on the vehicle recom- limit for any reason, including low temperature effects mended cold placard pressure.
Page 347
STARTING AND OPERATING 345 For example, your vehicle may have a recommended CAUTION! cold (parked for more than three hours) placard pressure • The TPMS has been optimized for the original of 33 psi (227 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 28 psi (193 kPa), equipment tires and wheels.
346 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, NOTE: • The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in and maintenance, or to provide warning of a tire the tire.
Page 349
STARTING AND OPERATING 347 The matching full-size spare wheel and tire assembly (if vehicle may need to be driven for up to 20 minutes above equipped) has a tire pressure monitoring sensor. The 15 mph (24 km/h) in order for the TPMS to receive this matching full-size spare can be used in place of any of the information.
Page 350
348 STARTING AND OPERATING 3. Lots of snow or ice around the wheels or wheel Vehicles with Compact Spare housings. 1. The compact spare tire does not have a tire pressure 4. Using tire chains on the vehicle. monitoring sensor. Therefore, the TPMS will not monitor the pressure in the compact spare tire.
STARTING AND OPERATING 349 Telltale Light” will turn off, as long as no tire pressure is The TPMS consists of the following components: below the low-pressure warning limit in any of the four • Receiver Module active road tires. The vehicle may need to be driven for •...
Page 352
350 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings Should this occur, you should stop as soon as possible The “Tire Pressure Monitoring Telltale Light” will and inflate the tires with low pressure (those flashing in illuminate in the instrument cluster and a chime the EVIC graphic) to the vehicle’s recommended cold will sound when tire pressure is low in one or more of the placard pressure value.
Page 353
STARTING AND OPERATING 351 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings.
Page 354
352 STARTING AND OPERATING turn on upon the next ignition key cycle. In addition, the 2. If you install the compact spare tire in place of a road EVIC will display a Low Pressure message and a graphic tire that has a pressure below the low-pressure warning showing the low tire pressure value flashing.
STARTING AND OPERATING 353 5. Once you repair or replace the original road tire and The tire pressure sensors are covered under one of the reinstall it on the vehicle in place of the compact spare, following licenses: the TPMS will update automatically. In addition, the “TPMS Telltale Light”...
354 STARTING AND OPERATING 4.0L Engine Over 40 auto manufacturers worldwide have issued and The 4.0L engine is designed to meet all endorsed consistent gasoline specifications (the World- emissions regulations and provide satisfac- wide Fuel Charter, WWFC) to define fuel properties tory fuel economy and performance when necessary to deliver enhanced emissions, performance, using high quality unleaded gasoline hav-...
STARTING AND OPERATING 355 Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-FFV vehicles are compatible with gasoline contain- genates such as Ethanol. Fuels blended with oxygenates ing 10% ethanol (E10). Gasoline with higher ethanol may be used in your vehicle.
356 STARTING AND OPERATING To fix a Non-FFV vehicle inadvertently fueled once with vehicles. The manufacturer recommends that gasoline E-85 perform the following: without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump, •...
STARTING AND OPERATING 357 Fuel System Cautions CAUTION! (Continued) • The use of fuel additives which are now being CAUTION! sold as octane enhancers is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentra- performance: tions of methanol.
358 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper WARNING! maintenance. Have the exhaust system inspected Carbon monoxide (CO) in exhaust gases is deadly. every time the vehicle is raised. Have any abnor- Follow the precautions below to prevent carbon mal conditions repaired promptly.
STARTING AND OPERATING 359 ADDING FUEL CAUTION! Fuel Filler Cap (Gas Cap) • Damage to the fuel system or emission control The gas cap is located behind the fuel filler door, on the system could result from using an improper fuel driver’s side of the vehicle.
360 STARTING AND OPERATING • If the gas cap is not tightened properly, the MIL will WARNING! come on. Be sure the gas cap is tightened every time • Never have any smoking materials lit in or near the vehicle is refueled. the vehicle when the gas cap is removed or the Loose Fuel Filler Cap Message tank is being filled.
STARTING AND OPERATING 361 VEHICLE LOADING tongue weight, and cargo. The label also specifies maxi- mum capacities of front and rear axle systems (GAWR). Certification Label Total load must be limited, so GVWR, and front and rear As required by National Highway Traffic Safety Admin- GAWR are not exceeded.
Page 364
362 STARTING AND OPERATING components, sometimes specified by purchasers for in- loaded into the vehicle. The front and rear curb weight creased durability, does not necessarily increase the ve- values are determined by weighing your vehicle on a hicle’s GVWR. commercial scale before any occupants or cargo are added.
STARTING AND OPERATING 363 heavier items down low and be sure that the weight is with your vehicle. Before towing a trailer, carefully distributed equally. Stow all loose items securely before review this information to tow your load as efficiently driving.
Page 366
364 STARTING AND OPERATING Gross Trailer Weight (GTW) Gross Combination Weight Rating (GCWR) The GTW is the weight of the trailer plus the weight of all The GCWR is the total permissible weight of your vehicle cargo, consumables and equipment (permanent or tem- and trailer when weighed in combination.
Page 367
STARTING AND OPERATING 365 that typically provides adjustable friction associated with WARNING! the telescoping motion to dampen any unwanted trailer swaying motions while traveling. It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition Weight-Carrying Hitch can result if either rating is exceeded.
Page 368
366 STARTING AND OPERATING safety. The addition of a friction/hydraulic sway control also dampens sway caused by traffic and crosswinds and contributes positively to tow vehicle and trailer stability. Trailer sway control and a weight distributing (load equalizing) hitch are recommended for heavier Tongue Weights (TW) and may be required depending on vehicle and trailer configuration/loading to comply with gross axle weight rating (GAWR) requirements.
Page 369
STARTING AND OPERATING 367 With Weight-Distributing Hitch (Correct) Improper Adjustment of Weight-Distributing Hitch (Incorrect)
368 STARTING AND OPERATING Trailer Hitch Classification Trailer Hitch Classification Definitions Your vehicle is capable of towing trailers up to 2,000 lbs Class Max. Trailer Hitch Industry (907 kg) without added equipment or alterations to the Standards standard equipment. Your vehicle may be factory Class I - Light Duty 2,000 lbs (907 kg) equipped for safe towing of trailers weighing over...
STARTING AND OPERATING 369 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ Model Frontal Area Max. GTW Max. Tongue Wt. Transmission (Gross Trailer Wt) (See Note) 3.7L/Automatic 32 sq ft (2.97 sq m) 2,000 lbs (907 kg)
Page 372
370 STARTING AND OPERATING When Towing Trailers with Gross Trailer Weight (GTW) between 3,500 Lbs (1 588 kg) and 5,000 Lbs (2 268 kg) The following chart provides maximum trailer weight ratings towable for the following engine/transmission combinations, ONLY if using a weight distributing hitch. Engine/Transmission Model Frontal Area...
STARTING AND OPERATING 371 Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
372 STARTING AND OPERATING Consider the following items when computing the Towing Requirements weight on the rear axle of the vehicle: To promote proper break-in of your new vehicle drive- train components the following guidelines are recom- • The tongue weight of the trailer. mended: •...
Page 375
STARTING AND OPERATING 373 WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the frame or hook retainers of the vehicle hitch.
Page 376
374 STARTING AND OPERATING − Check for signs of tire wear or visible tire damage WARNING! (Continued) before towing a trailer. Refer to “Tires – General 3. GAWR Information” in “Starting and Operating” for the 4. Tongue weight rating for the trailer hitch utilized. proper inspection procedure.
Page 377
STARTING AND OPERATING 375 actuated brakes. When towing a trailer equipped with WARNING! a hydraulic surge actuated brake system, an electronic • Do not connect trailer brakes to your vehicle’s brake controller is not required. hydraulic brake lines. It can overload your brake −...
Page 378
376 STARTING AND OPERATING Towing Requirements – Trailer Lights and Wiring Whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motoring safety. The trailer tow package may include a four-pin and seven-pin wiring harness.
STARTING AND OPERATING 377 Towing Tips Before setting out on a trip, practice turning, stopping and backing up the trailer in an area away from heavy traffic. Automatic Transmission The “D” range can be selected when towing. However, if frequent shifting occurs while in this range, the “TOW/ HAUL”...
Page 380
378 STARTING AND OPERATING TOW/HAUL – If Equipped Cooling System To reduce potential for automatic transmission overheat- To reduce potential for engine and transmission over- ing, press the “TOW/HAUL” button when driving in heating, take the following actions: hilly areas or shift the transmission to DRIVE position 2 −...
STARTING AND OPERATING 379 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheel OFF the Ground Two-Wheel Drive Models Four-Wheel Drive Models Flat Tow NONE NOT ALLOWED NOT ALLOWED Front NOT ALLOWED NOT ALLOWED Dolly Tow Rear NOT ALLOWED On Trailer...
380 STARTING AND OPERATING Flat towing (with all four wheels on the ground) is CAUTION! allowed ONLY if the driveshaft is removed. Towing with the rear wheels on the ground while the driveshaft Towing with the rear wheels on the ground (while the is connected will result in severe transmission damage.
382 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning Flasher switch is located on the In any of the following situations, you can reduce the lower switch bank below the climate controls. potential for overheating your engine by taking the appropriate action.
WHAT TO DO IN EMERGENCIES 383 NOTE: There are steps that you can take to slow down WARNING! an impending overheat condition: You or others can be badly burned by hot engine • If your air conditioner (A/C) is on, turn it off. The A/C coolant (antifreeze) or steam from your radiator.
384 WHAT TO DO IN EMERGENCIES Jack Location WARNING! (Continued) The scissor-type jack and tire changing tools are located • Being under a jacked-up vehicle is dangerous. The in the left rear trim panel behind the second row seat. vehicle could slip off the jack and fall on you. You could be crushed.
WHAT TO DO IN EMERGENCIES 385 Spare Tire Removal CAUTION! Fit the jack handle extension over the drive nut. Use the lug wrench to rotate the nut counterclockwise until the The winch mechanism is designed for use with the spare is on the ground with enough slack in the cable to jack extension tube only.
386 WHAT TO DO IN EMERGENCIES Jacking Instructions WARNING! WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off Carefully follow these tire changing warnings to the road to avoid being hit when operating the jack help prevent personal injury or damage to your or changing the wheel.
Page 389
WHAT TO DO IN EMERGENCIES 387 WARNING! (Continued) CAUTION! • Do not let anyone sit in the vehicle when it is on a Do not attempt to raise the vehicle by jacking on jack. locations other than those indicated in the Jacking •...
Page 390
388 WHAT TO DO IN EMERGENCIES 4. Locate the jack as shown. For the front tires, place it (rearward) of the notch on the body weld seam behind wheel to be changed. Rear Jacking Location Position the jack handle on the jack. Do not raise the vehicle until you are sure the jack is fully engaged.
Page 391
WHAT TO DO IN EMERGENCIES 389 9. Finish tightening the lug nuts. Push down on the WARNING! wrench while tightening for increased leverage. Alternate nuts until each nut has been tightened twice. The correct Raising the vehicle higher than necessary can make wheel nut tightness is 95 ft lbs (130 N·m).
390 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES WARNING! If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in Do not attempt jump-starting if the battery is frozen. another vehicle or by using a portable battery booster It could rupture or explode and cause personal injury.
Page 393
WHAT TO DO IN EMERGENCIES 391 WARNING! • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact.
392 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
Page 395
WHAT TO DO IN EMERGENCIES 393 8. Disconnect the opposite end of the positive (+) jumper WARNING! cable from the positive (+) post of the booster battery. Do not connect the cable to the negative post (-) of the 9. Disconnect the positive (+) end of the jumper cable discharged battery.
394 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE NOTE: If your vehicle is equipped with Traction Con- If your vehicle becomes stuck in mud, sand or snow, it trol or Electronic Stability Control (ESC), turn the system can often be moved by a rocking motion. Turn your OFF before attempting to “rock”...
WHAT TO DO IN EMERGENCIES 395 SHIFT LEVER OVERRIDE WARNING! If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the Fast spinning tires can be dangerous. Forces gener- following procedure to temporarily move the shift lever: ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires.
396 WHAT TO DO IN EMERGENCIES 5. Using a screwdriver, reach into the opening and press 6. Move the shift lever into the NEUTRAL position. and hold the shift override lever down. 7. The vehicle may then be started in NEUTRAL. 8.
Page 399
WHAT TO DO IN EMERGENCIES 397 Towing Condition Wheels OFF 2WD Models 4WD Models the Ground If transmission is operable: Flat Tow NONE NOT ALLOWED • Trans in NEUTRAL • 30 mph max(48 km/h) Front NOT ALLOWED Wheel Lift or Dolly •...
398 WHAT TO DO IN EMERGENCIES Two-Wheel Drive Models CAUTION! The manufacturer recommends towing your vehicle with • Do not attempt to use sling type equipment when all four wheels OFF the ground using a flatbed. towing. When securing the vehicle to a flat bed If flatbed equipment is not available, and the transmis- truck, do not attach to front or rear suspension sion is operable, the vehicle may be towed (with rear...
WHAT TO DO IN EMERGENCIES 399 15 miles (24 km), tow with the rear wheels OFF the Four-Wheel Drive Vehicles ground (on a flatbed, or with the rear wheels raised using The manufacturer requires towing with all wheels OFF a wheel lift or towing dolly), or remove the driveshaft. the ground.
MAINTAINING YOUR VEHICLE 405 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
406 MAINTAINING YOUR VEHICLE “Electronic Vehicle Information Center (EVIC)” in “Un- For states that require an Inspection and Mainte- derstanding Your Instrument Panel” for further informa- nance (I/M), this check verifies the “Malfunction tion. Tighten the gas cap until a clicking sound is heard. Indicator Light (MIL)”...
Page 409
MAINTAINING YOUR VEHICLE 407 2. If you crank or start the engine, you will have to start If your OBD II system is not ready, you should see your this test over. authorized dealer or repair facility. If your vehicle was recently serviced or had a battery failure or replacement, 3.
408 MAINTAINING YOUR VEHICLE REPLACEMENT PARTS WARNING! Use of genuine MOPAR parts for normal/scheduled maintenance and repairs is highly recommended to en- You can be badly injured working on or around a sure the designed performance. Damage or failures motor vehicle. Only do service work for which you caused by the use of non-MOPAR parts for maintenance have the knowledge and the proper equipment.
MAINTAINING YOUR VEHICLE 409 Engine Oil CAUTION! Checking Oil Level • Failure to properly maintain your vehicle or per- To assure proper lubrication of your vehicle’s engine, the form repairs and service when necessary could engine oil must be maintained at the correct level. Check result in more costly repairs, damage to other the oil level at regular intervals, such as every fuel stop.
Page 412
410 MAINTAINING YOUR VEHICLE manufacturer recommends engine oils that are API Cer- CAUTION! tified and meet the requirements of Chrysler Material Standard MS-6395. Overfilling or underfilling the crankcase will cause aeration or loss of oil pressure. This could damage American Petroleum Institute (API) Engine Oil your engine.
Page 413
MAINTAINING YOUR VEHICLE 411 Engine Oil Viscosity – 3.7L Engine Synthetic Engine Oils SAE 5W-20 engine oil is recommended for all operating You may use synthetic engine oils provided the recom- temperatures. This engine oil improves low temperature mended oil quality requirements are met, and the recom- starting and vehicle fuel economy.
412 MAINTAINING YOUR VEHICLE Engine Oil Filter WARNING! The engine oil filter should be replaced with a new filter at every engine oil change. The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine NOTE: For best access to the oil filter, a drive on hoist backfire.
MAINTAINING YOUR VEHICLE 413 Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. • Battery gas is flammable and explosive. Keep You will never have to add water, nor is periodic main- flame or sparks away from the battery. Do not use tenance required.
414 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance CAUTION! For best possible performance, your air conditioner • It is essential when replacing the cables on the should be checked and serviced by an authorized dealer at the start of each warm season. This service should battery that the positive cable is attached to the include cleaning of the condenser fins and a performance positive post and the negative cable is attached to...
MAINTAINING YOUR VEHICLE 415 Protection Agency and is an ozone-saving product. How- WARNING! ever, the manufacturer recommends that air conditioning • Use only refrigerants and compressor lubricants service be performed by authorized dealers or other service facilities using recovery and recycling equipment. approved by the manufacturer for your air condi- tioning system.
416 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. Avoid using the wiper blades to remove frost or ice from When performing other underhood services, the hood the windshield. Keep the blade rubber out of contact with latch, release mechanism and safety catch should be petroleum products such as engine oil, gasoline, etc.
MAINTAINING YOUR VEHICLE 417 into the passenger compartment. In addition, inspect the WARNING! exhaust system each time the vehicle is raised for lubri- cation or oil change. Replace as required. Commercial windshield washer solvents are flam- mable. They could ignite and burn you. Care must be WARNING! exercised when filling or working around the washer solution.
Page 420
418 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- • The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst leaded fuel only.
MAINTAINING YOUR VEHICLE 419 To minimize the possibility of catalytic converter dam- Cooling System age: WARNING! • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in You or others can be badly burned by hot engine motion.
Page 422
420 MAINTAINING YOUR VEHICLE garden hose vertically down the face of the A/C con- Cooling System – Drain, Flush, and Refill denser (if equipped) or the back of the radiator core. If the engine coolant (antifreeze) is dirty and contains a considerable amount of sediment, clean and flush with Check the engine cooling system hoses for brittle rubber, reliable cooling system cleaner.
Page 423
MAINTAINING YOUR VEHICLE 421 CAUTION! CAUTION! (Continued) • This vehicle has not been designed for use with • Mixing of engine coolant (antifreeze) other than propylene glycol based engine coolant (anti- the specified HOAT engine coolant (antifreeze) freeze). Use of propylene glycol based engine may result in decreased corrosion protection and coolant (antifreeze) is not recommended.
Page 424
422 MAINTAINING YOUR VEHICLE Please review these recommendations for using Hybrid Please note that it is the owner’s responsibility to main- Organic Additive Technology (HOAT) engine coolant tain the proper level of protection against freezing ac- (antifreeze). When adding engine coolant (antifreeze): cording to the temperatures occurring in the area where the vehicle is operated.
Page 425
MAINTAINING YOUR VEHICLE 423 rules for your community. To prevent ingestion by ani- WARNING! mals or children, do not store ethylene glycol based • The warning words “DO NOT OPEN HOT” on engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
Page 426
424 MAINTAINING YOUR VEHICLE engine coolant (antifreeze). Advise your service atten- If an examination of your engine compartment shows no dant of this. As long as the engine operating temperature evidence of radiator or hose leaks, the vehicle may be is satisfactory, the coolant bottle need only be checked safely driven.
MAINTAINING YOUR VEHICLE 425 • Make sure that the radiator and coolant recovery WARNING! bottle hoses are not kinked or obstructed. Riding the brakes can lead to brake failure and • Keep the front of the radiator clean. If your vehicle is possibly a collision.
Page 428
426 MAINTAINING YOUR VEHICLE should be checked when pads are replaced. However, WARNING! (Continued) low fluid level may be caused by a leak and a checkup • To avoid contamination from foreign matter or may be needed. moisture, use only new brake fluid or fluid that Use only manufacturer’s recommended brake fluid.
MAINTAINING YOUR VEHICLE 427 WARNING! (Continued) CAUTION! • Do not allow petroleum based fluid to contami- Using a transmission fluid other than the manufac- nate the brake fluid. Brake seal components could turer’s recommended fluid may cause deterioration be damaged, causing partial or complete brake in transmission shift quality and/or torque converter failure.
428 MAINTAINING YOUR VEHICLE CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the New Vehicle Limited Warranty. Fluid Level Check Your vehicle is equipped with a capped transmission oil fill tube.
MAINTAINING YOUR VEHICLE 429 Draining Fluid the vehicle. Fluid changes are not necessary unless the First remove the fill plug (1), then the drain plug (2). fluid becomes contaminated with water. Change the fluid Recommended tightening torque for the drain and fill immediately if contaminated with water.
430 MAINTAINING YOUR VEHICLE Adding Fluid hot or cold weather and other extreme conditions will Add lubricant only at the fill hole and only to the level have an adverse effect on paint, metal trim, and under- specified above. body protection. Selection of Lubricant The following maintenance recommendations will enable Use only manufacturer’s recommended fluid.
Page 433
MAINTAINING YOUR VEHICLE 431 Washing CAUTION! • Wash your vehicle regularly. Always wash your ve- • Do not use abrasive or strong cleaning materials hicle in the shade using MOPAR Car Wash or equiva- such as steel wool or scouring powder, which will lent, or a mild car wash soap, and rinse the panels scratch metal and painted surfaces.
Page 434
432 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, Wheel and Wheel Trim Care touch them up immediately. The cost of such repairs is All wheels and wheel trim, especially aluminum and considered the responsibility of the owner. chrome-plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion.
Page 435
MAINTAINING YOUR VEHICLE 433 • For tough stains, apply MOPAR Total Clean or if absolutely necessary. Do not use harsh cleaners or equivalent, or a mild soap solution to a clean, damp Armor All . Use MOPAR Total Clean or equivalent to cloth and remove the stain.
434 MAINTAINING YOUR VEHICLE When cleaning the rear view mirror, spray cleaner on the If the seat belts need cleaning, use MOPAR Total Clean towel or rag that you are using. Do not spray cleaner or equivalent, a mild soap solution, or lukewarm water. directly on the mirror.
Page 437
MAINTAINING YOUR VEHICLE 435 Cavity Cartridge Mini- Description Fuse Fuse 25 Amp Driver Door Node Natural 25 Amp Passenger Door Node Natural 40 Amp Antilock Brakes Green Pump, Stability Con- trol System 30 Amp Antilock Brakes Pink Valve, Stability Con- trol System Totally Integrated Power Module 40 Amp...
Page 438
436 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description Fuse Fuse Fuse Fuse 60 Amp Ignition Off Draw – 25 Amp Sunroof Module – If Yellow Main Natural Equipped 40 Amp Rear Defroster 15 Amp Rear Center Brake Green Blue Lamp, Brake Switch...
Page 439
MAINTAINING YOUR VEHICLE 437 Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description Fuse Fuse Fuse Fuse 20 Amp Front Heated Seat – If 20 Amp Ignition Off Draw – Yellow Equipped Yellow Instrument Cluster, Wireless Control — — Module, SIREN, Mul- 15 Amp Ignition Off Draw –...
Page 440
438 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description Fuse Fuse Fuse Fuse 10 Amp Airbag Module/ 10 Amp Right Horn Occupant Classifica- tion Module 10 Amp Left Horn 15 Amp Left Front Park & Blue Side Marker/Left 25 Amp Rear Wiper –...
440 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS CAUTION! • When installing the integrated power module LIGHT BULBS – Interior Bulb No. cover, it is important to ensure the cover is prop- Dome Lamp......TL212–2 erly positioned and fully latched.
MAINTAINING YOUR VEHICLE 441 BULB REPLACEMENT CAUTION! Headlamp Do not touch the new bulb with your fingers. Oil 1. Open the hood. contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the 2.
442 MAINTAINING YOUR VEHICLE Left Front Turn Signal 1. Turn the steering wheel all the way to the right (full right lock). 2. Remove the door in the left wheel liner by twisting counter clockwise. Access to the bulb can be gained through the wheel liner hole.
MAINTAINING YOUR VEHICLE 443 Right Front Turn Signal e. Pull the grille assembly toward you to disconnect the grille clips to the fender and the headlamp ball- 1. Open the hood. studs to the front end module. 2. Reach behind the headlight unit in the engine com- 3.
444 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Rear Tail, Stop, Turn Signal, and Backup Lamp 1.
MAINTAINING YOUR VEHICLE 445 5. Pull the backplate straight back from the lamp hous- ing. 6. Disconnect the electrical connector. 7. Remove the bulb from the backplate. Center High Mounted Stop Lamp (CHMSL) 1. Remove the two screws securing the CHMSL. Screw Locations 2.
MAINTAINING YOUR VEHICLE 447 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hy- brid Organic Additive Technology) or equivalent. Engine Oil – 3.7L Engine Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Page 452
450 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE Based on engine operation conditions the oil change The Scheduled Maintenance services listed in this indicator message will illuminate, this means that service manual must be done at the times or mileages specified is required for your vehicle. Have your vehicle serviced to protect your vehicle warranty and ensure the best as soon as possible, within the next 500 miles (805 km).
Page 453
MAINTENANCE SCHEDULES 451 scheduled oil change is performed by someone other At Each Stop for Fuel than your authorized dealer, the message can be reset by • Check the engine oil level about five minutes after a referring to the steps described under “Electronic Vehicle fully warmed engine is shut off.
Page 454
452 MAINTENANCE SCHEDULES At Each Oil Change Required Maintenance Intervals Refer to the Maintenance Schedules on the following • Change the engine oil filter. pages for the required maintenance intervals. • Inspect the brake hoses and lines. CAUTION! • Failure to perform the required maintenance items may result in damage to the vehicle.
Page 455
MAINTENANCE SCHEDULES 453 8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
454 MAINTENANCE SCHEDULES 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 457
MAINTENANCE SCHEDULES 455 40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 458
456 MAINTENANCE SCHEDULES 56,000 Miles (91,000 km) or 64,000 Miles (104,000 km) or 48 Months Maintenance Service 42 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 459
MAINTENANCE SCHEDULES 457 72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 460
458 MAINTENANCE SCHEDULES 88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). Odometer Reading Date Repair Order #...
Page 461
MAINTENANCE SCHEDULES 459 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏...
Page 462
460 MAINTENANCE SCHEDULES 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 463
MAINTENANCE SCHEDULES 461 120,000 Miles (195,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏...
Page 464
462 MAINTENANCE SCHEDULES 128,000 Miles (208,000 km) or 96 Months Maintenance Service 136,000 Miles (221,000 km) or Schedule 102 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 465
MAINTENANCE SCHEDULES 463 144,000 Miles (234,000 km) or 108 Months Maintenance Service 152,000 Miles (247,000 km) or Schedule 114 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 466
464 MAINTENANCE SCHEDULES † This maintenance is recommended by the manufacturer WARNING! to the owner, but is not required to maintain emissions • You can be badly injured working on or around a warranty. motor vehicle. Do only service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Suggestions For Obtaining Service For Your Vehicle......467 Speech Impaired (TDD/TTY) .
Page 468
466 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... 473 Department Of Transportation Uniform Tire Quality Grades ......473 ▫...
IF YOU NEED CONSUMER ASSISTANCE 467 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
468 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 solved with this process. Auburn Hills, MI 48321–8004 Phone: (800) 423–6343 •...
IF YOU NEED CONSUMER ASSISTANCE 469 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
470 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment WARRANTY INFORMATION when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
IF YOU NEED CONSUMER ASSISTANCE 471 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, you a group of vehicles, it may order a recall and remedy should contact the Customer Service Department immedi- campaign.
Page 474
472 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC ve- maintaining, servicing, and repairing Chrysler Group hicles.
Page 475
IF YOU NEED CONSUMER ASSISTANCE 473 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
Page 476
474 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
Page 486
484 INDEX Alarm ......200 Headlights ......441 Anti-Lock .
Page 487
INDEX 485 Traction Control ..... . . 322 Maintenance Schedule ....450 Turn Signal .
Page 488
486 INDEX Multi-Function Control Lever ....151 Opener, Garage Door (HomeLink®) ... 170 Operator Manual (Owner’s Manual) ... . 5 New Vehicle Break-In Period .
Page 489
INDEX 487 Phone, Hands-Free (uconnect™) ....98 Rear Window Features ....189 Placard, Tire and Loading Information .
Page 490
488 INDEX Restraints, Occupant ..... . 38 Front Seat ......39 Roll Over Warning .
Page 491
INDEX 489 Service Manuals ......471 Engine Fails to Start ....294 Setting the Clock .
Page 492
490 INDEX Tachometer ......206 Inflation Pressures ..... 333 Temperature Control, Automatic (ATC) .
Page 494
492 INDEX Vanity Mirrors ......98 Waxing and Polishing ..... 431 Variance, Compass .
Page 495
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 496
Chrysler Group LLC Fourth Edition 11KA74-126-AD Printed in U.S.A.
Need help?
Do you have a question about the Nitro 2011 and is the answer not in the manual?
Questions and answers