Table of Contents
Advertisement
Electrical Requirements
Required Saw Blade
Maximum Blade Height
Arbor Size
Cutting Capacity
Maximum Rip to Right
Maximum Rip to Left
Saw Blade Tilt Capacity
Drive System Type
Belt Type
Fence Scale
Miter Gauge Scale
Dust Port Dimensions
Table Height
Fence Dimensions
Table Dimensions
Table Extension Dimensions
Net Weight
Accessories
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product's serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
failure to follow all instructions listed below may result in
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
for technical questions, please call 1-800-444-3353.
SKU 95112
product specifications
220 VAC / 60 Hz / 18 Amps
3 HP Motor / Single Phase / 3450 RPM
Power Switch Type: Push Button (Magnetic ON/OFF)
Required Power Plug Type: 3-Prong, 220 VAC, Polarized, Twist-Lock (Not
Included)
10" Diameter with 5/8" Arbor Hole rated at 4150 RPM or greater (Not Included)
3"
5/8" Diameter
3" @ 90° / 2-1/8" @ 45°
50" (Table Supported)
10" (Table Supported)
45° Maximum
Triple Belt Drive
Standard V-Belts: A-27 (Included)
0"<->50"
0°/90° <->30° Left or Right
4" Outside Diameter
34-1/8" High
37" Long x 3-3/8" Wide
36-1/8" Wide x 27-1/16" Long
27" Long x 8" Wide
480 Lb.
Saw Blade Guard / Miter Gauge / Rip Fence / Saw Blade Removal Tools.
save this Manual
general safety rules
read and understand all instructions
electric shock, fire, and/or serious injury.
saVe tHese instructions
worK area
warning!
Page 3
Advertisement
Table of Contents
