Product Specifications; General Safety Rules; Work Area - Central Machinery 45804 Assembly And Operating Information

Brought to You by Augusta Flint
ITEM
Electrical Requirements
Blade Size Capacity
Overall Dimensions
Table Dimensions
Adjustable Rip Fence Size
Scale Measurement Increments Inches / Metric
Maximum Rip With Fence
Blade Adjustments
Cutting Capacity
Weight
Accessories Included: Fence Assembly, Blade Guard, Bottom Plate,
Mitre Guide, Push Stick, Elevation Wheel Handle, 3 Hex Wrenches (4mm,
5mm, 6mm), 2 Spanner Wrenches
Item #529 - 10" M2 Molybdenum Tipped (40 Tooth) saw blade.
You will need this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and cleaning procedures,
parts list and assembly diagram. Keep your invoice with this manual. Write
the invoice number on the inside of the front cover. Keep this manual and
invoice in a safe and dry place for future reference.
Failure to follow all instructions listed below may result in
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
SKU 45804

PRODuCT SPECIFICATIONS

2 HP Motor /12 Volt /60 Hz
13 Amps /3,600 RPM
10" Diameter / 5/8" Arbor (blade not included)
22-3/4" W x 26" L x 15-1/2" H
26" W x 17-1/2" L
17-3/4" W x 1-7/8" L
9-1/2"
90 Degrees to 45 Degrees
2-7/8" at 90 Degrees
2-5/16" at 45 Degrees
32.85 Lbs.
* NOTE:
Recommended Blade (not included):
SAVE THIS MANuAL

GENERAL SAFETY RuLES

WARNING!
READ AND uNDERSTAND ALL INSTRuCTIONS
electric shock, fire, and/or serious injury.
SAVE THESE INSTRuCTIONS

WORK AREA

PAGE 2
DESCRIPTION
E194601
REV 07j