Central Machinery 93762 Owner's Manual & Safety Instructions
Horizontal/vertical metal cutting band saw
Hide thumbs
Also See for 93762:
- Assembly and operating instructions manual (34 pages) ,
- Set up and operating instructions manual (29 pages)
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20i
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Central Machinery 93762
Summary of Contents for Central Machinery 93762
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 3 Feed work into a blade or cutter against the direction of rotation of the blade or cutter only. 21. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop. Item 93762 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 9. Properly adjust the upper blade guide, blade 5. Hold workpiece firmly against table. tension and blade guide bearing before each use to reduce the risk of injury. See Operating Instructions for explanation of needed adjustments. Page 4 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 5 It must be understood by the operator that the workpiece and/or Saw Blade will result. common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Item 93762 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SaVE tHESE inStructiOnS. Page 6 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 7 11-1/2" L x 7-1/2" W x 23-1/2" H Vertical Bed 9-1/2" L x 9-1/2" W x 33-1/2" H V-Belt Type 0-506 64-1/2" L x 1/2" W x Blade Size 0.025″ Thick / 14 TPI Item 93762 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 (128) tool plate (128) Wheel Wheel Bracket Bracket (130) (130) pin (11) pin (11) Stand (10) Stand (10) Stand (10) Stand (10) pull Handle (12) pull Handle (12) Figure a Page 8 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 9 Body Frame (93). 3. Secure the Pulley Cover to the Band Saw, using one Screw (89), Spring Washer (7) and Flat Washer (8). Refer to Figure E. Motor (115) Figure E Item 93762 For technical questions, please call 1-888-866-5797. Page 9...
- Page 10 Soft Brass, SMaLL LarGE WarninG! tO prEVEnt SEriOuS inJury: Aluminum, Plastic Always securely close the Lid on the Pulley Cover Figure H after installing a V-Belt or adjusting the cutting speed. Page 10 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 11 Horizontal cutting Screw (78) Guard (71) d. Position the Vertical Cutting Table Support between the Body Frame and the head of the Bolt. e. Firmly re-tighten the Bolt. Figure K Item 93762 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Hand Hand Support Support Wheel Wheel power power plate plate Stock Stop Stock Stop cord cord Locking pin Locking pin power power Switch Switch Machine Bed Machine Bed Page 12 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 13 Miter Vise Plate. Re-tighten the Bolt. angle Scale angle Scale Bolt (43) Bolt (43) Moveable Moveable Miter Vise Miter Vise Vise plate Vise plate plate plate Bolt (40) Bolt (40) Figure O Item 93762 For technical questions, please call 1-888-866-5797. Page 13...
- Page 14 (69) (69) Blade Guide Blade Guide Bracket (73) Bracket (73) Blade Guide Blade Guide Bracket Seat (74) Bracket Seat (74) Figure Q: Lower Blade Guide assembly Page 14 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 15 Band Saw and re-tighten the two Bolts. 9. Close the Blade Back Cover and secure with the Screw and Flat Washer. Saw Blade (66) Saw Blade (66) Wheel Flange Wheel Flange Figure r Item 93762 For technical questions, please call 1-888-866-5797. Page 15...
- Page 16 Machine Bed (122). 3. Once the adjustment is made, re-tighten the Blade Guide Adjusting Knob. Figure u Page 16 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 17 The power cord must reach the work area with enough extra length to allow free movement while working. Item 93762 For technical questions, please call 1-888-866-5797. Page 17...
- Page 18 6. Before cutting, turn on the Band Saw and check Locking Locking pin (126) pin (126) for excessively loose Saw Blade (66) tension or machine vibration. Turn off the Band Saw Figure W and correct any problems before using. Page 18 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 19 Band Saw to remove material reach. Refer to Figure W on page 18. faster than it is designed to cut. Item 93762 For technical questions, please call 1-888-866-5797. Page 19...
- Page 20 Turn the Support Plate (127) clockwise until it access the Saw Blade. Refer to Figure Z. firmly locks into the Body Frame and insert the Locking Pin to lock the Body Frame in position. Page 20 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 21 V-Belt. Refer to Figure AA. 6. Tighten the Bolt to secure the Motor in place. 3. Remove the old V-Belt from the two Pulleys (99, 105). Refer to Figure AB. Item 93762 For technical questions, please call 1-888-866-5797. Page 21...
- Page 22 Spring Washers, Flat Washers, and Bolts. Gear Box cover (110) Gear Box cover (110) Bolt (111) Bolt (111) Spring Washer (7) Spring Washer (7) Flat Washer (8) Flat Washer (8) Figure ac Page 22 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 23 7. Blade Guides are poorly aligned. 7. Adjust Blade Guides. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 93762 For technical questions, please call 1-888-866-5797. Page 23...
- Page 24 3. Blade Guide Bearing 3. Tighten Blade Guide Bearing Bracket. Bracket is loose. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 24 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 25 Moveable Vise Plate Upper Guard Plate Flat Washer 10 Flat Washer 4 Bolt M10 x 30 Blade Back Cover Miter Vise Plate Upper Blade Wheel Bolt M8 x 25 Lift Block Item 93762 For technical questions, please call 1-888-866-5797. Page 25...
- Page 26 If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175330574 when ordering parts. Page 26 For technical questions, please call 1-888-866-5797. Item 93762...
- Page 27 Diagram 8 90 57 54 8 133 8 30 5 31 32 37 8 9 127 126 14 15 16 17 18 Item 93762 For technical questions, please call 1-888-866-5797. Page 27...
- Page 28 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 93762 and is the answer not in the manual?
Questions and answers
How do I Get parts for this 93762 ?
You can obtain parts for the Central Machinery model 93762 by contacting the manufacturer or distributor. The manual advises that all repairs and part replacements should be done by certified and licensed technicians. For technical questions or to inquire about parts, you can call 1-800-444-3353. Additionally, replacement parts like the drive belt are available from other sellers online.
This answer is automatically generated
Need a part
You can find a replacement part for the Central Machinery model 93762 on Amazon.com. A replacement drive belt for this model is available under ASIN B0DGSZ1PTG.
This answer is automatically generated